Well, if anyone is still watching my build, this is where I am at. I will be stripping the paint soon and shining up the body with acetone. Spot checked inside and the acetone works better than any car wax for an almost instant shine. But first there is this pesky crack/hole to finish. At least the small front cracks are almost done, two more ABS layers should do em (Pic #1). The back of the crack is shrinking, about a third of the way done, and it does seem to be quite strong, even with a lot of pressure trying to push one side down, it does not give, pretty impressive, especialy since I have not yet gone over with the final top and bottom coats yet (Pic #2). Last, the previous owner's skidplates (Pic #3) will be re-used untill I am able to make a set of HDPE skids, or Stainless Steel. (If budget allows at that time) Oh, is anyone missing some road signs?
