Quote:
Originally Posted by micmac
Hold on twaynej I'm not sure if you know this but you leave both plugs out when filling. Fluid goes in the top one and when it runs out the bottom one your done. you most likely have too much fluid in there.
Micmac
|
that's what had me confused to start with, how can you use the same drain plug to empty the fluid, then add fluid till it runs out the same hole .and expect it to be filled with the proper amount of fluid. ? does it have a third hole that was the drain hole that we did not see. I did not take out the drain plug myself but it looked as though my brother took it out from underneath the transmission, I know he soaked up the fluid with a bunch of rags. I have read several posts that mentioned just a procedure you said.
Still puzzled.