[mad_max_500cc]

ive got to be honest only 3 times have i had to fill a t-20 in a max and all three were because i had the tranny apart for something so i was starting with an empty trans the guys at the factory always said 1qt and 1 bottle of additive so i just dumped that mutch in and ran it never realy checked the fluid level with the plug! ...... just rember to put the right plug in the right hole one is vented the other is not when the fluid gets hot it expands and the level rises, or it will get splashed out of the vent if it is in the lower hole!!!(i know it sounds basic but ive seen it done before) also make shure the vent is not cloged (in the plug) or pressure can build up in the trans and blow out a seal or oring!!!!!