This is a Series 2 Marsh model. Only 500 of these were made. This one was purchased several years ago in northern Michigan where is was used as an ice fishing vehicle. It is registered and titled as a boat in NY (registration and insurance are current). This machine excels in extremely bad conditions especially swamp and muck.
I upgraded the machine with a new seat, new seat mounts, seat belts and a 1.5” cage to protect occupants. I also removed the original 2 stroke motor and replaced it with a Honda GX-670 (24 HP) motor. There is also an ATV winch on the front and a trailer hitch on the back. I built a custom plow mount for the machine that mounts a 70” snowplow with manual angle. The plow is very well built and the machine does a nice job plowing due to the zero turn radius. There is a quick connect on the plow so you can leave the frame on but take the plow off in the winter (with no bolt removal).
The body is in good condition, there was damage to the front from an ice fishing auger (cracks can be seen in the pics). This was epoxied with marine epoxy. There are some chips and dings but overall very solid. The tracks are also serviceable, there are no major tears, some small ones but they have not been an issue. Some bogey wheels need new bearings and the boogies could use some TLC, however it has never thrown a track and drives well.
Included with this machine are the original owner’s manual, service manual, and parts manual. Also included is the Honda GX670 service manual and a few spare parts. Parts from this machine are still available, a new company sells an updated model. If you would like more information about this machine you can look at cushman trackster.com Vintage Trackster or RangeRunner by Mac's Trax, Inc. | TerraTrack Grand Rapids, Michigan .
$4,400 obo
I have a bunch of pictures if you are interested PM me or email me and I will send them. Putting pics up on this forum has never been my strong suit.
Nick