Has anyone put a simple roll bar on an 8x8? I do not want the full ROPS cage but just a simple roll bar.
Would love some pictures if you have done this.
Scott
Has anyone put a simple roll bar on an 8x8? I do not want the full ROPS cage but just a simple roll bar.
Would love some pictures if you have done this.
Scott
I'm going to build one like the Razor has but haven't decided how to mount yet. Check out a Razor they have a good design that can easily work on an Avenger. Guys are putting lexan with a 6-7 inch horizontal space at face level for a partial windshield and it works really good for protection and vision. Windshield is attached to roll bar with zap straps and I've seen roll overs with no problems.
I used a 2001 Kawasaki Mule rollcage, removed the back shield and cross member, ground off junk not needed and bent bars out some to weld to 1-1/2x2 angle. Tweaking with some lights and braces. Not as fancy as razr, but the razr i measured would never stretch enough to go across my Bigfoot. They are also short in the front. This project is underway as we I type. When finished, I’ll try to post a pic.
Last edited by bilimrl1; 03-11-2015 at 09:21 AM.
This is more what I was thinking of http://i300.photobucket.com/albums/n...psbwh5glip.jpg
That is the 6 wheeler roll bar/ light bar.
My new beer holder spilled some on the trails - in it's hair and down it's throat.
Joe Camel never does that.
Advice is free, it's the application that costs.