rebuild

  1. Welcome to 6x6 World.

    You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
+ Reply to Thread
Results 1 to 2 of 2

Thread: rebuild

  1. #1
    Join Date
    Jan 2014
    Location
    Fort Mcmurray Alberta
    Posts
    3

    rebuild

    I have 2012 750hdi and replacing the lower half. I need help with the holes that are to be drilled out . i have the drill guide buy not sure where to start . I well take any help full advice thank you.

  2. #2
    Join Date
    May 2009
    Location
    NJ 08533
    Posts
    5,049
    What I did with the last one I did was use the old body, or the frame, with a piece of cardboard that ran the length then transfer your marks with the holes centered. Using the body stiffeners as guides the holes should transfer easy enough. An angle drill with a short bit could do the small holes if wanted.


    My new beer holder spilled some on the trails - in it's hair and down it's throat.
    Joe Camel never does that.

    Advice is free, it's the application that costs.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts