Search:

Did you set the gap with the piece of paper spec 'd for the gap?

The ground wire from the ignition attaches to the diodes before they attach to each armature. Prevents the coils from connecting to each other is my understanding. If u remove both kill wires (with...

Are the diodes missing? Maybe disconnect the kill wires and see if u have spark.... Just a guess

I had a hard time doing this the first time too. I used a side coupler with a pair of vise grips to hold it steady. I was practically upside down on my head with a flashlight making sure I had it...

Those things would all make a difference. Ive had what would be considered wayyy to much weight in my bigfoot and it still handles "ok" in the water. I wouldn't recommend this practice as you lose a...

Hey guys. This is kinda a noob question but im quite curious. How come the Argo Bigfoot is only rated for 350lbs in the water but the newer Frontiers can take 500lbs?? Is it just due to tire size and...

Good to know. Thanks guys. I don't think the frame is out of square. I did a Couple diagonal measurements and from what I can tell the cross members and remaining floor on the front and back and...

Been digging through the search tool results and I guess it comes down to 1/16 or 1/8. Just depends on the degree of flex you prefer..

How thick is the steel in a floor pan. My bigfoots floor pan is wrecked from rust and I'm going to lay a new piece over it and mig it to the frame rails. I don't want to put something to thick in and...

Ok. Def something to consider fixing. thank you for your input. Hopefuly I can just lay a new piece over the old one and get a good weld without catching anything on fire.

Hello 6x6 world! I've been glued to this site for the last 2 months learning as much as I can about my 98 bigfoot I bought last fall and what can I say. This is an amazing forum. Between all the...