Defiantly need new pads. One is good the other is worn right off. As mentioned your rotor may need turning or replacing too. Is the calliper seized or sticking? Sorry for your luck.
Type: Posts; User: 2014SE
Defiantly need new pads. One is good the other is worn right off. As mentioned your rotor may need turning or replacing too. Is the calliper seized or sticking? Sorry for your luck.
9-1/2 Litre Pneumatic/Manual Fluid Extractor | Princess Auto
These things are awesome. It works by hand pump or compressed air. Very simaler to a Mityvac (also avalible on Amazon)
As Avenger...
Go to a different agent. Don't feel obligated to be loyal to a particular agent or company, their not loyal to you!
I live in Alberta and have full coverage same as described by Noel Woods. Seems...
What machine?
Maybe it's the tracks? I run a 2014 HDI and I'm running Escargo's and have 500km on them without a issue. Not a single flat, never lost a track and the tires still look like new. Channel tracks have...
I know those spacers on eBay with 1/2" studs work on stock Argo wheels, I got them on mine. I also ordered spline drive Chrome lug nuts (2 sets 1/2" & 7/16") to keep the mud and dirt off the studs...
I got a extra pair of gloves and a chain saw. If you need all that junk onboard I'd be looking for a newer more reliable machine. Your overloaded before you get in!!
same with Alaska. I haven't started the snowblower a single time this winter.[/QUOTE]
Landed in Calgary the other day, coming home from Belize. No snow! None! +15C. Layover in Dallas, was a...
Awesome info Bakedalaskan! I have compared my speedo with my GPS and so far so good. I did print off the calibration info and put in my owners manual. Using that info I might play around with it when...
2014 HDI SE. I ordered mine new and they sent it with the 8.4 (not what I ordered!) and I hated it!!! I had them change it to the standard 6.4 and like everything about it now!!! I can go 35kmh bear...
Cool, as always.
Optima yellow top. The only battery I'll buy, I got them in my truck, jeep, welder, argo, kubota backhoe and my wife's car. Cost a few bucks more but worth every penny. The truck and welder started...
How much space is between the tires? I know my HDI with 25" tires are close, I don't think a track will fit, I'm away from home workin and can't go measure. I did see pictures of a guy who ran the...
Why not a set of Escargo tracks? It'll make your machine stay out of the rut and increase your capabilities 5X. And their not made of plastic!!
I agree that 1500 is way to high. I think mine runs at 700 but I'm not home and can't check. Seems to me Most engines idle at 650-800.
looking at their website, adair has some classic tracks that are elevated 17" wide. I think the elevated track is the style to choose escargo or adair or channel tracks. But from what I can gather...
It's definitely a case of you get what you pay for. I understand that cost will be a concern but the quality of Escargo far exceed the other brands. Take into consideration how well raised belt...
Excellent and valid point Tuck I never thought to mention that on my earlier post above. One of the meany advantages to steel grousers is the steering ability. With a Escargo track you have about 9"...
Did you ever get your machine in Russia?
For sure have to beware. Theirs a lot of things to consider with a Argo. I looked at some too before deciding to go new and I'm glad now I did. It takes 3-6 weeks if you order one but you get the...