Search:

Thanks for the answer!
Did you have any problems with backfire after "nipping the tip"?
I wanted to do exactly that,to remove that chanse for problems when hunting (not really hunting since that is...

Great vid!
Thanks for sharing!

Hello everyone and thanks for the replys!

Update:

Now I cleaned the carburator in my ultrasonic cleaner again (Great buy by the way,super for cleaning carburators,brass for reloading aso)
I...

Hello fellow swedish argo owner!
If you would like to buy parts I could recommend bandvagnar.se or argo norway (google it). They have good prices and if you call argo norway,he is very helpfull,...

Hello!
I have a strange problem with my 1994 conquest (kawasaki 620 engine). I had a problem suddenly that it was only running with choke and was weak. I found out that the fuelpump was broken (+...

Thanks Kris W! And sorry for the late reply,I had missed your nice comment!

The conquest runs great now after the restauration,I used it alot now during the summer,I made a long hard testdrive...

Hello again!
I've seen that Rockdocktor put 24" tires on an conquest.
Do I have to modify anything to do that on my argo or is it only to buy new tires?
I have some crappy (useless in water) tires...

The restoration is now finished,please look at the first post of this thread and let me know what you think.
All feedback are welcome,good and bad!
Mattias

Thanks guys!
It means the world for me to be able to go here for advice!
I put two shims on the secondary clutch (pushing it to the left side and now it won't touch the chain!
Yesterday it was the...

Hello!
My restoration of my 1994 conquest is almost over and its close to testdrive!
But I have problems with the clutches,the secondary clutch is allways turning,also with low idle. I have...

I also had to add that I have switched the front/rear axels with the middle ones so I got better surface for the sealings and bearings. So I don't have the "hole" in the axle for the setscrews.

I...

on an conquest 1994 with standard Axels

Hello!
A (maybe) stupid question-
How do I tight the outer bearings on the front and rear axle?
I looked at RD:s video but in that he didn't lock the setscrews (I saw in another post later that he...

Thanks!
I added an update and some more pictures in the post above,its a really fun project!
And this is the eveningproject..

http://www.ladda-upp.se/tumnagel/qwfykrbnrzcikr/

Hello!
Great work and and and inspiration for me (us) who are doing a restauration !!
can you please post (or PM) some picture of your rear winch mount?
I saw your pictures that you already have...

One year ago I heard that a friend had an Argo that had been standing for a lot of years but he didnt want to sell it. After a year he agreed to sell it so I bought it.

It had been standing...

http://www.ladda-upp.se/tumnagel/nqudlkmdteboln/Update:
The wireing was working good,the problem now is that the starter is just a pile of rust and completly stuck..
I took it apart but it was...

Thats the info I need!,Thanks man!
I will buy some switches now and see if i can get it started!
I dont have high hopes that it will start (yet) since the ignition coils and starter engine has been...

Hello!
It has the Kawasaki engine.
Its strange but when I removed the oilplug,there was no water in the oil but there was water in the cylinders!
Doesnt get how that is possible but i check the...

Hello!
Its my first time here som be nice....
My name is Mattias and I live in northern Sweden,I have just got an 1994 Conquest who have been filled with water on and of for some years.. Stranding...