Replace the chain it's cheap and you will have it apart to try and install the half anyway.
Type: Posts; User: deermedo
Replace the chain it's cheap and you will have it apart to try and install the half anyway.
If your bearings are seized etc. you may as well cut the axles out as they are probably shot anyway. It will also be a good opportunity to install the HD axles and bearings and then you are done.
I'm thinking about drilling and plastic versus an air ratchet with nylock nuts and the nuts are reusable. i would like to end up with a quickly removable top half for maintenance on inside chains,...
Hey Guys,
Any reason when assembling the top and bottom halves of the tub you cannot use 1/4 inch bolts?? Gasket would not be sitting so good but any other concerns??
I am thinking stainless...
I lived in Kap for 8 years and know the area fairly well.
John Miller
Why have sealed bearings inside the housing that is supposedly greaseable??
Is that the trail into Saganash Lake??
From what I have been reading I would try 4 track tuners on the center 4 wheels from Adair.
Any horsepower saving is a good thing.
John
Let us know how they work out.
Mr Moose,
I bought a 1988 18 hp on supertracks brand new and had the same problems you are encountering now in the snow.
No matter what it was simply underpowered for the amount of...
Hey Buzz,
I take it you have tried this on tracks have you??
Thanks
John
I am overhauling some wheel bearings this winter and I am going to unhook the second axle chain.
That will make my machine front wheel drive only for testing purposes to see what happens. The big...
Does it make sense to install track tuners on the center 4 if you are on tracks all the time?? Why send power to those two sets of wheels if they are contributing nothing or very little as far as...
Gentlemen,
I wanted to thank you guys for your input and so here goes the fix after my Life Altering Escapade.
I removed 1/2 link and now have 36 links with 5 psi and 2 to 3 inches of clearance. It...
Hi Guys
Hey Doc,
There was 4 to 5 inches at the center wheels with 8psi in the tires. The tracks are old but not used that much and only in the swamp.
My center to center distance is 6 inches.
Thanks for...
Thanks for the responses guys I think it was a combination of loose track and freezing slush with a mixture of branches.
I am running 36.5 segments but they seem to have stretched so I will try to...
Hey Guys.
I just returned from hunting sharp tailed grouse in the swamp and I ran into some major trouble. The terrain here is swamp and I mean swamp so the Argo 13 inch tracks are continuously...
Where is it found on a 2003 Conquest??
Thanks
John
Thanks for the info guys I'm actually looking for more low end and didn't realize the t 20 had no low gear.
I currently run tracks (standard Argo) and up here in Moosonee I am always running on...