Hello again,
So the trans is out. No obvious issues with hardware. I did notice one think but I am not sure and I did not want to alarm my friend for no reason. It may not even be related. The...
Type: Posts; User: nemanuel
Hello again,
So the trans is out. No obvious issues with hardware. I did notice one think but I am not sure and I did not want to alarm my friend for no reason. It may not even be related. The...
Hello again,
I was told that the engine and trans were removed to repair the frame. We will be taking the trans out as soon as I get some free time. I will keep you posted. I do appreciate your...
Hello argojim, thank you for the reply. The first two pics are from my own argo and its fine. The third pic is my friends at it has the problem with the belt rubbing against the exhaust.
Hello back, we checked for both mounting bolts and they seem to be fine. I am not sure where else to look. If you guys anymore suggestions please feel free to post them. thank you.
Hello again,
Thank you for the quick reply. He did tell me that they had the engine and trans removed to do some repairs to the frame. I will take another close look then I will let you know.
Hello guys, I finally have an argo partner to ride with. We met some time last week and as I was looking at his argo we noticed that the belt was actually cutting right through the exhaust pipe....
I hope I am doing this right. First of all I would like to thank all of guys that helped me with my Argo including Mike. Without you guys I would have had a very difficult time getting it done. So...
Just wanted to let you know that by removing 1/8" from the key worked very well. The clutch is right against the spacer with no play at all. Thank you very much guys.
Hello argojim,
I will do that as soon as I get a chance. I uploaded the photos but I don't know where they went. Thanks.
Hello Mike,
Thanks for the reply. Would you mind telling me how to post pictures again please? I have a 2005 Avenger with 26 hp. kohler engine. The argo parts numbers are: driver clutch 610-126,...
Hello Guys,
Merry x-mas and happy new year. I just installed the new style clutch and driven on my Argo. According to the instructions the 5 shims on the engine shaft are to be replaced by one...
Hi,
Thank you for the quick reply. I very much appreciated.
Hello Guys,
I was just wondering if it is necessary to install the set screws on the idler shaft sprockets? No where in the Argo Avenger manual shows that it is required. Thank you for your time.
Hello Mike,
I did it and its a lot better. There is still a little play though. Thanks.
Hi Mike, thanks for the info. I will try that and I will let you know.
Hello guys,
I was just wondering if it is normal with the forward play in the twist throttle? I just replaced the old as it was worn out and the new throttle has a lot of forward play. Any help...
I have repaired the leak in the pump and ordered a new mechanical pump. Thanks guys.
Thank you for the reply. I will repair the leak for sure. I am assuming that even if I use the electric fuel I would still need the accelerator pump.
Hello guys, can some body please tell me what is the function of the accelerator pump on the carburetor? I have a small gas leak from it. Is it important to have in cold climate. If not, can I just...
Hello everyone,
The very last thing left on the Argo to finish was to take the carb apart clean it and replace the gasket and O rings. I was assured by the dealer that kit No. 24 757 03-s was the...