well to start off with the dji phantom is has gps , and will hold position even in a 30 kilometer wind , it has a 300 meter range but i have flown it 500meters, i have installed an on board screen...
Type: Posts; User: bart oosterbaan
well to start off with the dji phantom is has gps , and will hold position even in a 30 kilometer wind , it has a 300 meter range but i have flown it 500meters, i have installed an on board screen...
hey all just picked up a new toy its a dji phantom quad copter , iam using it to scout out trails for me on the argo , ive got some goggles that have tv screens in each eye and a 5.8 ghz TX on the...
well suprise , Lukes called me to tell me they were sorry , have reduced the price of the cheaper bearings and are now stocking argo bearings , and will ask the customer which bearings they want ,!
...
hey all , so i orderd 4 outer bearings for my 750 avenger , from lukes town service in ellie manitoba canada ,
what did i get an uc206-104d1, now this is the same size bearing and will work , but it...
very cool thanks for all the info guys!, since ive allready orderd parts , ill just keep what i got for now i dont want to upset a good argo dealer by cancelling them now , and to me its just not...
hmm intersesting ... very ,, and thanks for the info ,, so i see in the pics there is no more flang with seals?? the bearing seals out the water ?
260 hours on it so 2200/ 260 = 8.46 mph! i do LOT of trails that i go 4-8 mph on all day long , and i geuss the odd time i go down gravel roads at full tilt < to get somwhere > brings it up a bit,...
really that much?? wow i have a branty new 750 avenger hood for sale then !!! green btw!
my buddy crosses rivers with his tracks on , and no outboard , just puts her in high gear floors it ,, so much water shoots forward he goes backwards at 3 mph on gps, hes held it like that across a...
love caribou meat mmmmmmMMMMMMmmm, lucky you !
that seems strange , normally when the bearings go the axle will have play up and down , is the bolt that holds the axle in place at its end < inside> tight? there are also set screws that hold the...
i own a 750 avenger efi and love it, i will say this though even with the 750 ,< non hdi> it takes some learning on how to drive it when to turn etc , my first impression was wow this thing is...
hi , i finnally got round to tearing down the argo as i noticed i had a outer bearing gone , so i decided to have a good look at it and replace some things as its getting alot of miles on it, and i...
b4 you get to far in there ,
iam wondering about this metal tube , to me it sounds like the heat riser on an older model dodge,<76-87>
its job was to take warm air off the exuast manifold and add...
i just finished replacing my front axle on my 09 avenger , and if you leave the mounting bolt for the plow . or rescue hooks , whatever option you have out .
then yes water can go right into to hole...
i once got stuck in summer following a big excavator and high centerd on the big middle ridge, that was once in over 1000 miles ,
check out numberonecas's and mine vids on you tube if you want to...
yup i agree, i just did front , idler and middle < second tire> chains, thought id get through with my ole grinded down channel locks wich are ok for the 60 stuff , but for the double 50 you really...
i cut the outer race off with an angle grinder with a cut off blade then i arc welded a bead around the inner race to try to heat it up and remove it . no go ,then chisle and hammer and just broke...
hey all iam asking for a friend, he has a 97 bigfoot 6x6 and wants tracks for it ,
from what i understand you need to get smaller tires for the tracks .?
is there an option that didnt need...
ok guys fist off thanks for the info and stories, any experience is great ,
got the clutch off np just a little pull on one side and tap tap with hammer .
just to answer above posts , was no...