Search:

any briggs repair shop can order that for save your money dont order on line

it is registered as a motorcraft in pa.
never thought of searching post good idea

while i finally agreed to sell it uncertain on year but it is a 8x8 with super track sys kaw liguid cooled .winch twin battries soft top .in north west pa 6500.00

It is very good for business i go through about 2500. a year in carb kits. If you guys have not changed over yet they make e 100 fuel line it will not break down or harden last for ever it seems like...

really no need to replace just clean. I had thought about this yesterday I had suggested to another to use l leak down tester it will verify where your promblem is . You can get them at harbor...

you need a leak down tester harbor freight very cheap most motors you will hear blow by with compressed air. a leak down tester will tell you exactly how bad it is. very easy to use and no guess work...

you may want to check if valves have a build up on them but the only way to do this is to pull head. The build up comes from the wonderful ethanol .on cleaning the carb and I do not know what yours...

ethanol is in all grade of gas. they do make ethanol free but it will cost you. As a small engine mechanic ethanol is 60-70 percent of my business. I use a ethanol treatment. and tell my customers to...

Yes you do have water in there it will take forever to get it out you could try to run it with kerosene for a few min. but no longer than drain. but oil soaked with water is pretty hard to remove .if...

you would have to look up your motor number to see if it has a decompression in the motor. With out it you will hate life.

Another thing That fits a little more along the line of what you describe . I think you may have a valve starting to stick. This is caused by fuel problems heat or a couple of other things. The ...

if you strike out I am a small engine repair shop in pa

sorry been away from computer for a couple of days .If your carb has a little silver looking plug on it those come out and you will see tiny ports back there no matter how much you soak or blow air...

there is a new law I think morse mann act manufactures can no longer void warranty by use of after market parts or oil and fluids.

yes that is correct on steel vers plastic if you have the tool it is not bad to replace without it becomes a tad bit harder

yes her in pa we get heavy snow and drifts I was trying to think but I cant remember a time I was stuck with tracks with out tracks plenty

never really needed them in deep snow Mine just goes along I did add cleat kit which helps out a lot. Mine are the 18 is that what you have?

when I did them on my conquest they were very easy but that was 5 years ago I can't rember the exact process but I do know I did not use a press I did have to cut some off of the shafts because my...

no looked up his motor but as we all know when installed things change from factory. I really am having a hard time trying to help him so if any one wants to chime in please do. I am very aware of...

sorry I missed you wanting help I had offered up to you said you were waiting on it. I must have missed your asking next time just pm me through here. Ok so have you got any pics yet. Like I said the...