Every winter my Argo Bigfoot vinyl seats get more and more cracked when temps fall into the -30c and the vinyl becomes brittle.
I've recovered the back seats with black vinyl only to have then...
Type: Posts; User: srfnson
Every winter my Argo Bigfoot vinyl seats get more and more cracked when temps fall into the -30c and the vinyl becomes brittle.
I've recovered the back seats with black vinyl only to have then...
Well thought I provide an update...drained the gas and vacuum pumped out the last bit through the fuel line, changed the fuel filter and put new plugs in and she fired up no problem. I think I had a...
I use this stuck to the oil pan http://www.amazon.ca/gp/product/B00NIOEYJ8?psc=1&redirect=true&ref_=oh_aui_detailpage_o03_s00
It gets very hot very fast…I use these pads and the magnetic version...
Thought I'd pass along what I used to mount my LED bar on my bushguard...install was very easy and it looks really good:
Amazon.com: PIAA 74000 7/8"-1.25" L-Bracket, (Twin Pack): Automotive
...
What I did on my bigfoot was to replace the factory lightbulbs that were 37W each with 10w led bulbs then put a 60W LED bar on the bushguard. The led bulbs are quite dim but the lightbar is very...
Thanks for the ideas guys...oil was a little full but just changed it last week and suspect I overfilled it a bit. Will check plugs and carb...at this point I"m suspecting ice or blockage in fuel...
After working on a new trail on our property with our Argo 04 bigfoot with adair pro tracks and cleats we decided to take the frozen river back home to save some time as the light was fading with...
Hi there,
I have a 04 Bigfoot and live north of the border up here in Manitoba. I go ice fishing alot with my machine and live on a quater with a river and lots of bush so my machine gets driven...
John's advice is bang on...I have a 04 bigfoot and cranking it in -30c or colder can be a difficult although she always starts eventually.
I use Amsoil 0w40 powersports oil and resort to a pair of...
Really like your design! Exactly what I need to build for my bigfoot!
Can you share the dimensions?
I replaced mine from the inside and it really wasn't a problem dismantling the muffler and shield.
I think if you try and do it from the outside with the muffler in place you'll end up bending...
Hey thanks guys!
l'm dying for more snow too so l can really see what these tracks can do! Usually we have a couple feet by now not a couple of inches!
-43 Celsius with the windchill yesterday...
Loving my new Adair pro-series tracks....
http://i987.photobucket.com/albums/ae355/pwhweb/G0060371-Edit-Edit_zps988854ae.jpg
...
Here's a quick video using my go pro camera....
http://www.youtube.com/watch?v=zyVfqbvVT4s
Yeah that was my thinking as well...running just the tracks without cleats in the summer. I had my tracks on just before the snow and cold temps came and I was impressed how little the cleats tore...
Sure...will take the measurements when I'm back at my property next weekend and let you know.
Recently purchased a set of the Pro Series Tracks from the guys at AdairArgo for my 04 Bigfoot. All I can say is I'm one happy customer! .
I have a quarter section with forest, wetland, streams,...
I just replaced the clutch on my 04 Bigfoot (500 hours)...the bronze bushing was very worn causing excessive belt wear and belt flapping noise. Take a look at to see if there is any wobble in your...
Last update guys....
Installed the new clutch and wow! Machine is running great now...feels like a completely different argo!
No more belts slap/vibration and after a weekend of driving the new...
Can't really say as I can not see the bushing or how it's held in place on this new one.
The 127-129 original clutch that I had in my Bigfoot I'm pretty sure takes the same bushing as the more...