You can buy an adaptor kit to make the hdi bearings fit up to your old style bearing extensions. Adair Argo used to make the kit
I made my own for my 99 conquest. You need to buy a new bearing also.
Type: Posts; User: Supermag
You can buy an adaptor kit to make the hdi bearings fit up to your old style bearing extensions. Adair Argo used to make the kit
I made my own for my 99 conquest. You need to buy a new bearing also.
The 8x8 would elinminate the need to pull trailers allot of the time. When I pull a trailer behind my 8x8, I prefer to have some weight loaded in the back for extra traction. Keep in mind I have...
The 2008 frontier 8x8 owned by a friend of mine has the brake cooling fan. He did not add it as an option. He is not sure if it came standard or if the dealer up here ads it on to all his frontiers...
Has this issue been ongoing since the rebuild or shortly there after or just something that poped up? I had the same issue with my conquest when I bought it. The prevous owner had done a...
The 2007 and earlier models had some issues with the low range and reverse gear sliding out of position on the shaft. the gears are held on the (not sure of the name of the shaft) shaft with...
Brake cooling fans are a must. Any open differential argo "steering" transmission requires brake disc cooling. I installed a switch for the cooling fan on my conquest. I forgot to turn it on a few...
Best thing to do to that fuel shut off solenoid is to snip the end off. They seem to fail in the middle of a swamp or a long water crossing. Just let the engine idle a few seconds prior to shut...
It is difficult to compare a 23 year old machine to a brand new, more ergonomic unit with the latest technology. I have no experience with the new generation of frontier but have spent many hours...
Helo Curtis, I owned a magnum for 10 years. they are great machines. As for your overheating issue, RapidRoy is spot on. Process of elimination is the key. One thing you could check is the color...
this did not happen on the trail but could cause some serious problems for our electronic ignition, electric start machines. My 99 conquest has an alternator kit. I make sure to always have a good...
I have about 300 hours on The fronts and rears on my 99 conquest. I have not replaced one bearing so far. The only issue I have had was the pressed in grease fittings pulling out. I used a right...
X3
Go to pure-gas.org on google for lists of ethanol free gas across the USA and Canada.
I am in Timmins.
Most of the engines that power our machines were not originally designed to be installed in an atv. They were built to power industrial equipment and operate at a high rpm. Water pumps, lawn...
As Noel Woods mentioned, ethanol laced fuels are causing problems when used in any engine that does not get constant usage. I only use premium gasoline from shell Canada in any small engine I own. ...
2002 argo conquest
A friend of mine was constantly blowing fuses on his ignition side fuse block. Mainly the main fuse. He also noticed his low voltage light would come on from time to time, and...
One of my hunting partners has a 2008 frontier 8x8 with the Briggs 23 hp engine. His Argo now has about 250 hours and is running strong. Last fall he pulled out an avenger 700 with a blown...
I'd like to start a thread so everyone can share their experiences of any issues they encountered while out with their Argo, and what was done to get going again. I had a few issues last fall and...
The only difference between the conquest and the avenger are the bearing extenssion design. The conquest uses 4 long bolts that go from the bearing flange to the outer frame rail to secure the...
The new HD axle is a direct replacement for any axle wich uses the 1" I.D. Inner bearing. (older pre conquest models used straight 1.25" axles.). They are the same lenght and axle diameter. I have...