Search:

940094019402Got the tranny out. All I can say is this wont be a cheap or easy fix. I can tell the tranny has been apart before and I'm not sure if it was too much power that broke everything or if it...

Well it's for sure not a T20. I looked up old argo transmissions and long and behold there was a bunch of pictures of what mine looks like. First place I saw the pic was on Richards Relics in the...

I've been looking on the Internet and the pictures that match the tranny seem to be a coot transmission if that helps any?

Did you get anywhere with the braking issue?

I'll have a look at it but as for it going in gear it seems as if its not grabbing a gear. It's pretty smooth when moving the shifter so I don't know if this is the issue but ill look at it on the...

It has a bolt right through it that's still there and I could see it moving the whole shaft. It felt like it was gonna grab a gear but never did when I was fooling with the selector at times. I also...

Not sure exactly what year it is but it's a 8x8. Just put in a 503 rotax motor. Finally I've got some power rather then the old Tecumseh motor. Did a few test drives in the driveway and it worked...

Lol I don't even know what I have. The guy I bought it from said it is a mid 80's. It's a Argo 8x8. I still don't even know what tranny is in it. How do I figure out what tranny I've got? I'm going...

Yes I was looking at the duromax and was thinking about maybe going that route. Others seem to have luck with them. As for the carb on my Tecumseh it sucks. It's the walbro and seems like any...

I've got a 16hp Tecumseh that needs a starter. Motor runs ok but is had to start. The starter is $160 plus tax. I found a Kohler 16hp complete with exhaust for $300 that was upgraded to a 22hp twin....

Well I got it started with the pull cord. Not easy at all! When I rev it up the secondary opens and closes. Seems to be smooth. Never got to drive it. When I jumped into the machine to try it out it...

The engine seems to have a decent amount of power. I have nothing to compare it to though. If I can get it started this weekend I'll look to make sure the secondary is smooth. The started went last...

Mid 80's Argo. 16hp Tecumseh. In neutral if I rev the motor the belt will rise to the top of the primary clutch. When in gear and I'm moving with it wide open the belt will not rise. I feel I can...

I changed the fuel and ran a carb cleaner through it as well. I know its not the same as taking it apart. Ive got the fuel pump thats on the firewall, does that come apart? it looks sealed. what you...

Excellent question. I'm trying to do the exact same with my mid 80's. I have no idea what I gave but did see the breather on the top that's curved down. My transmission has two forward speeds if that...

I have a mid 80's Argo 8x8 with the 16hp Tecumseh in it. Just can't seem to run the greatest. I'm thinking it should be better then this.
I did replace the throttle cable yesterday and put on a...

Long and behold I think i fixed the brake problem. I did replace the bolt about 3 times all with grade 8 bolts. I kept bending them trying to get this thing to turn. So I sat in it this morning...

need help with my mid 80's 8x8. located in marmora on. ANY help is going to go a long way.

tried the new speacial nut on the left side first because that was the side that was giving me the most grief. No such luck.the wife says its time to get rid of this sac of doo doo! between the brake...

well i went looking for some castle nuts today. Home Depot, Princess Auto, Rona, Canadian Tire, Royal Distributing, Napa, Fastenal, Torbram electric, some place that sells china atvs and finally...