Search:

Hello 6x6world guys & gals. Were're hopeing some of you hustler guys can help out with these issues. I sold this starter to Zfish. It is from a 72 kohler 400. It mounted underneath the muffler on the...

Swimming, i love the fact i don't have to carry a small boat to some of the out of the way lakes. I love driving my argo/ boat from the road/trail rite into the water, crossing the lake then driving...

Maybe these overinflated prices on the machines will help raise the value of all our machines? If people see the crazy prices on tv & ebay they'll think it's all true. I quess it's like the old...

I have double that amount into my 1970 argo 6x6 so i'd say he found a steal. Some of us would concider that price "next to free".. Great find!!

If you really want a 2 stroker keep your eyes peeled for a $100 snowmobile. I bought 2, a 71 panther, 71 puma both with Arctic cat T1A400's. The kohler 400 K3992t 440 were in the old john deere i...

My 70 has round headlite bezels & i seen 78 or 79 used the square ones like on yours. On the earily 70's they used a single chain & sprocket on the drive/brake discs to drive the main jack shafts. If...

Cool, i can't wait to hear it's runnin great!!

I think you found the problem too. They are the little brass threaded plugs i believe. They are where you can drain out the crankcase of fuel/oil. Amazing the difference in comp. The piston & rings...

Awsome!!! Now you have a brand new machine What more could be said besides GREAT JOB MAN!!!

I have seen a coversation on here somewhere about the argo trans & what was said was "if it was not true 6x6 or 8x8 they would simply be going in circles" My argo sends power to all 6 wheels equally...

Since (odg) argo has been in business producing machines for over 40 years & still building them they must have done something right. How many builders are still around out of the 100 + makers?

I think the hd has a wide mouth bolt pattern & hr has a smaller one. I read you checked the needle seat tickeller that lets the fuel in, check to be sure it's no more than .020 away from the body....

Before i found a new carb i bought a mikuni vm34sv I was going to buy the rubber mount with 2 15/16 bolt hole space as a lot of snowmobilers do as an upgrade. You can use a walbro instead of the...

I was having a very simular issue with my arctic cat t1a400a i put in my argo. Carb after carb. Then i got real lucky & found a new old stock, still in the box walbro wda1-1 carb & it runs like new...

The hustler in clifford pa that i posted the 2 pics of, last i seen on C-list he said he's going to part it out cause he can't get the $600 for it.

Hi larry. Just my 2 cents opn the motor. The 440 has over 40 hp. but the 18/20 hp. 4 stroke makes good torque. I quess it all depends on what type of riding you plan to do. Parts are reasonable for...

Needing the choke to draw the fuel sounds like a vacume leak or low comp- since you rebuilt & cleaned the carb. Possably lower seals, around the intake/carb gasket or just low compression. With low...

32:1 is heavy but more oil is better than less. Try cutting it back some & see how it is. You will need a timing light for the timing. I set mine at the factory notch(s) then you ca start from...

Do a compression test if you have access to the gauge. I'n not sure of the #'s it needs. I think it's around 100 & more psi. If it's at 90 or below it definatly will need the rings. Hopefully it's...

I do know that the lower crank seals have a lot to do with the vacume of the gas coming into the cylinder. My engine was racing at idle & i noticed the seal was bad, i could see the bearing around...