Search:

Say Martwell could you ask your friend Santaria if he thinks the parts for his kit could be modified to fit a Max 11 , they`re pretty close to Argo in design. Thanks

The system works good, but if you need a lot of heat disconnect the engine's oil cooler.I did not install a thermostat ,I just top off the oil and every thing just flows through.

I've got 25'' GBC DirtDevils on my Max 2 and while they provide an vast improvement in ride and traction on every terrain they don't make a good water tire, but then again 95% plus of my millage is...

Thanks,I've got it now and will check the assembly in the weeks to come.

I'm sorry but I can't clearly see the pictures or read anything and I can't enlarge them.

When I returned the clutch to the co. I had them install the red spring while they had it apart, but It should of work just like the green one.

I've opened up the clutch completely and everything was clean and moving free, so the only thing left would be the tension.

Well it hasn't had time to attract dirt, the clutch was clean before I took it off and the pastic buttons were plowing in the ramps.You'd think that after it was smoothed down,replaced the buttons,...

I've been having trouble with the secondary sheave again.I've sent it to the co. after driving only two months when new,they said it was improperly put together at the factory and now it's starting...

Seems that in the past few days this web site logs me off while I'm writing something, I would like this fix soon, it's starting to be a major pain.

I pickup the smallest wiper unit in stock but you can get one made for a Rhino or Polaris Razor ect... some modifications to the arm assembly was needed in order to work properly and I've also added...

I've install a small wiper motor assembly made for a tractor on my Max 11,notice anything else about this 2007 Max 11?

What I got is a backseat heater design for vans,bus etc..that come in a variety of sizes and runs on antifreeze.The 23hp engine as oil lines that run to a small cooler.I ran the engine for a few...

I've made a gas pedal out of a large barn door hinge,the throttle cable is just long enough for this.I had to heat the floor panel around the pedal so it wouldn't interfere.Works great and I wouldn't...

I've got a Max 11 with the 23hp and I bought a small heater about 6"x6" design for antifreeze and I ran the engine's oil through it.Run great up untill it gets really cold and it takes only a little...

I've got a 2007 Max 11 with the 23 hp Kohler and all I did was install two small 150 watts window defrosters.Has soon as the winshield starts to defrost I use the only the fans because the engine...

I should have a How-to steering wheel project ready in a few weeks.

The tires are 25" Dirt Devils and while they're not the best in the water they offer a better ride than the stock tires on solid ground by helping out with 9" of ground clearance and offering more...

Sorry for the wait people I'm still working on the (How to steering wheel set up)for the Max.I've got all the pics and measurements and I should have it finish in another few weeks.

I got my seats today from the upholsterer.The seats are from my 84 Suzuki SJ 410k,they fit perfectly inside and will offer a more comfortable ride.All I need now is a radio.