Thanks guyfox!
I found some 52 OC belts but I am unsure of the top width required, I will try Argo sales and service, thanks again!
Type: Posts; User: Newfy Moose
Thanks guyfox!
I found some 52 OC belts but I am unsure of the top width required, I will try Argo sales and service, thanks again!
Hi guys,
Just wondering if anybody would know of a replacement belt for the 1984 I/C 8? It has a 17 kohler with the 1190 clutch. The belt width would also help me out.
Thanks
Newf
Thanks Bazooo I will give it a try!
Hi Racerone3,
I'll give it a try. Have you ever rebuilt a master? Much too it?
Thanks
Newf
Hi all,
Looking for some help with a brake sticking issue. I have a 1984 I/C 8x8 with hydraulic brakes. I have one side that will not release total after steering. This creates a steering...
Looks great!
Great video. Those tracks are great. Keep it coming.
Thanks
Great video's!
I know a guy on this site that upgrade the shear pins to the next larger size with great results. I believe 3/8 was the size and I believe Grainer is where they came from.
Newf.
Hi Rock,
Great video keep it coming. Moose must be hungry!
Newf
Machinist's Workshop magazine actually tested penetrants for break out torque on rusted nuts. Significant results! They are below, as forwarded by an ex-student and professional machinist, Bud Baker....
Hi RD,
Did some research a while back and found a site which actually had test results for pentrating fluilds. The market types were all out performed by a ATF/acetone mix of 50/50. Used it...
Great Video.
Great job. Do you have any trouble with the battery where it is located?
Newf.
Great video Doc. Your wife did such a great job on the quad it made me think there was little difference between the two in the muskeg.
Newf.
Great video! I was wondering where the bubles from the exhaust had gone.
Great video!
Newf
Hi Rock,
Those 24" tires make it look easy. Nice video.
Newf
Hi,
I have an I/C 8x8. It's just an ordinary argo with the double fifty chains and sprockets. It has a 17 Kohler and is a 1984 version.
Newf
Hi all,
Just got another argo.
Came with a yamaha bravo (18 hp) snowmobile engine in it. I am looking to upgrade. Has any one installed a 503 bombardier motor in an ARGO?
Newf