Search:

If you don't mind me asking, what size of socket did you buy and where did you buy it from?

I have noticed my tach not working. I'm not sure how it is wired in or what wires I should look for? Any help would be greatly appreciated!

I sucked out almost a litre (quart) from the top with a vacuum pump and then refilled to the middle of sight glass. I might try and heat it a little and use an impact wrench. What size do you use on...

I bought a 2014 Avenger with Admiral Transmission. I went to drain the trans but I can't get the drain plug to budge.

Is this a common problem? Anybody have any suggestions on how to crack that...

I recently purchased a 2014 Avenger EFI. The machine starts and runs great. Upon inspection I noticed a long clear hose coming off the carb that appears to go nowhere and is sitting open near the...

I'm assuming your 31 hp is an EFI. If so, how does it start in the cold? Does it need much warmup time? Any problems with that engine?

I would say that's how it runs. I'm kind of surprised, because I have an 83 Argo with a Kohler KT17 and I find that this new Aegis engine doesn't run any smoother than it. I would have thought that...

I know this is an odd question, but I just bought a 2006 Avenger. I got it cheap because the guy said it wasn't running right. Upon inspection I discovered that the oil was too full and the plugs...

I currently have an 83 argo with double chains. I'm thinking of upgrading to something newer primarily so I can add a snow plow. I didn't even realize that some argos have single chains. Is double an...

I'm in Saskatchewan. So far the dealers here that I've contacted don't have them and aren't interested in bringing them in.

I'm looking for shear pins for my argo axles. Seems I can't get any locally and anyplace I have found online wants $40 shipping for 5 pins which seems outrageous to me.

Anybody have a good...

One online that I might be interested in is a 2011 31 hp liquid cooled Kohler EFI. What's the verdict on the Admiral trans - good or bad?

What year did the Avenger come out? Is the main difference just the transmission? I see a 2011 for sale online which I might be interested in. Would that be a good year?

Thanks!

I currently have an 83 8 wheeler that I love. I'm thinking of upgrading to a newer model because I will be moving to the "cabin" and will need something that can plow snow and be very reliable.
...

I have an 1983 Argo. The service manual says to use Dot 4 brake fluid. The user manual says to use Dot 5. Have no idea what's in there now.

I assume Dot 5?

I'm not sure about something as new as 2004, but I remember reading somewhere that if the idler chains aren't at proper tension they can slip and cause a loud bang. My old '83 was doing something...

I have an old 83 Argo 8x8 which works really well. After a fairly long run I noticed I was having trouble turning left. I thought I should check the brake fluid in the master cylinder, something I...

This is a long shot and probably doesn't pertain to your situation, but it might to others. I have an old Argo that was occasionally experiencing sputtering. If I opened up the needle valve on the...

I'm near Regina Sask.

I'm also thinking of adding a soft top and snow blade. Anyone have any ideas on what kind of soft top would be best? Can I use one from a UTV? Will an Argo one work with an...

Where's the best place to source parts for an old 1983 8x8 Argo. I'll be checking things like brake pads, idler chains, chain tensioners etc.

Canada preferred but anyplace will do!

As for...