Search:

anyone know what bearing number are used on the jackshaft it a 1985 6x6

My seats all bolt in from the bottom (1985)

thanks all for the info time to go shopping for a 4 cycle tach

I installed a tac on my 4 cycle engine it came off a 2 cycle now it reading double anything i can do to fix that?

photo gallery i'm new with this site so it was the only way i found in the short time i've got before work hope it helps someone

A few mods have been made to fit the mounting holes are moved in with a rat tail file, 3/8 nuts are cut for spacers i'll have to try to get the pic on this site

if you have carb problems later the flange size on most are 2and1/2 inch so most twin carb snowmobiles might fit like the older artic cat the 32mm mic carb works good on my tec engine

I just did the bearings and seals and chains in my 84 argo if this is about the same year the bearing # are sa206-20 or uc206-20 and the seals#are timken 471413 the factor bearing are sa206-20 hope...

argo t5544

i went to 4 places trying to find bearing and can't find any that fit the info i got is 1 1/4 inside and 2 3/8 outside i think that might be wrong and 5/8 wide.or 1.25x2.375x .625. it a 1984 i can't...

ok got it over filled i'm mid stick lucky i used 80/90 thank you for the replay george

Hi i just got my first argo it's a fixer upper it a 1984 6 wheeler needs alot of work so i've got alot of qustions to ask look like the right place to get it fixed i'm happy to find this site i live...

i got a old 84 argo and the dip stick dose not have ant marks on it so i don't know the safe level and do i use 80/90 or aft?

i ran across the same problem tonight
i'm thinking about putting a resister in line with the pump to slow it down, or putting in a return line with a valve so i can adjust the amount of pressure one...

Thanks you for the info Swamper

can anyone tell me the model and year of this 16 hp tec engine T5544 model#