Does anyone have any knowledge of the process for registering the Argo for water in Louisiana? I use mine to fish out of a lot but found out I would be illegal in public waters. As you can guess...
Type: Posts; User: cdover73
Does anyone have any knowledge of the process for registering the Argo for water in Louisiana? I use mine to fish out of a lot but found out I would be illegal in public waters. As you can guess...
Thanks curtisbyrne! That's exactly the kind of matter-of-fact info I was looking for. I am actually able to figure most of this out myself, but it really helps to get opinions from those that has...
I have a few questions regarding my 2016 hdi I am hoping some of you can help with.
1. Is the hood fan a much-needed accessory for South Louisiana heat? I am having no issue with overheating,...
Also, regarding that last post about the bilge pumps and before I get pounded....I know the best solution is to not get in a situation where water would come inside the tub! But I am a firm believer...
Awesome replies!! Thanks! That pretty much confirms what I was thinking. If you have seen any of my other posts you may know I have had a hard time dealing with water navigation. I had to learn...
Rofl!!! I am soo glad to hear I'm not the only one who has had an anal-cranial inversion (wait for it....)!! I knew the water wasn't deep enough to actually sink it, but it was deep enough to allow...
Is it possible to turn an 8 wheel machine over? I am running stock tires at 3psi, don't have the ROPS or any other weight that sits high, no tracks, and do have front and rear racks and a winch. My...
Jim, I appreciate the effort, but I'm actually in agreement with the other's posts. I would love to help put something like this together, but I am realizing what they are saying and that there may...
Buzz - that is actually probably the best synopsis I have seen to sum it up! A lot of good points in there. And I totally agree that there are many different scenarios and options to consider. But...
I know this topic has been beaten more than any , but I for one am sick of trying to put together multiple posts and long hours of searching to get the information I need in one spot, and still not...
I was able to get all but one tensioned properly. The one is not stretched enough yet to allow the cam to rotate to the next notch. I feel stupid now that I see how easy it was when you get the...
Okay, so after a weekend of riding fairly hard and carrying more than max capacity with people on board, I stretched the chains to the point they are all now scary loose! But I found my problem...it...
I think that's how I would describe it. More body twist than frame flex. It's a weird feeling, but it's definitely the seat moving separate from the frame. I have already found loose bolts from...
That oddly all made sense....lol! But can you clarify a little more on the frame flex? Mine isn't very bad at all. You can barely feel the seat twisting under you when you go over bumps at an...
So what is the rule of thumb on when to change the front chains? Is it a measurement, 3" like the others per the manual? Or do most people have a reference that tells them it's time, like when they...
No tracks. So, there IS supposed a set screw in those holes? Both front sprockets are the same. Nothing in the holes and the sprockets can move back and forth on the shafts. I figured this was to...
Not much difference in tire size. I do have one that is about 3/4" smaller than the rest but it's the Left #3. I don't think that's enough to worry about.
I did notice the #1 drive sprocket is...
I see there are a few options for chain material. Standard, stainless, corrosion resistant, Japanese, etc... Is there a preference for material? And does anyone know offhand roughly how many feet...
That all makes sense. So does anyone have a good source for quality chains? Vendor info? I am new to the Argo world and haven't had to go through this before so bear with me. Thanks!
That is weird! But I feel better knowing it's not just me. Not that misery loves company, but now it may be easier to get the factory to fix them if it's a multiple-machine known problem. I'm not...