Search:

Well I was finally able to get it. I realized I didnt have all the wheels off the ground completely and in doing so it gave the extra but of slack that was needed. I was able to get the chain off...

Had the front left bearing go bad, just got done replacing but when I went to reinstall the front chain its short by one link (one link short after master) I cant quite figure out how this would be...

Sorry I never shared that part! I kinda jumped the gun Taking the fuel pump off - Long story short I realized I wasnt getting fuel because I have a shutoff valve installed in the gas line to try to...

Well I was able to get it..there is indeed a screw plate on the back side inside the valve cover, it just kinda falls back when it was unscrewed. But i had a thought and noticed the oil cap is right...

Are you meaning then try screwing the the pump back on or are you referencing to do this then take valve cover off?

That would make sense. Im not around it to look but do you know if I will need a new gasket if i take that off?

No, valve cover still on.

http://s1042.photobucket.com/user/Packattk/media/IMG_6027_zpswzennjyx.jpg.html?sort=3&o=0

So the one bolt you can see is actually on the top. Those two top bolts arnt catching onto anything but...

Ya it is the one your thinking of with manual pump. Ill try to uplaod pic. I have the avenger 8x8 w kohler. I think i figured out that top bolt holes have to be perfectly lined up with the linkage...

I wasnt getting fuel so i took the fuel pump off to check it out, when installing it back I noticed the top two screws wernt 'holding on' to anything almost as if they were stripped but looking at...

Thanks, I did think about that. My intention is to only use it that way for plowing only. It is an extremely easy change. Just the way the plow hooks up its a straight shot down and the line has...

Finally got s chance to check it out. By switching the cables connected to the winch it now allows for the 'IN' on toggle to top feed. Otherwise id have to press 'OUT' for it to top feed. So...

But the only way that it could feed 'in' from the top is actually using 'Out' on the on the Toggle to actually feed in when reverse fed line, right? No big deal I could deal with that - but just...

Appreciate this info. I have definitely noticed that with the winch the line rubs on the bottom of the hawse fairlead with strong tension because like you said it's pretty much a straight line. It...

Don't have tracks. Everything has handled fine - I guess i never really noticed how much the back tires were off the ground anyways to be honest - Long story short I didn't use/have Argo for years....

Appreciate the insight, thank you.

First year using the argo plow, works great. With plow installed though, the back tires are raised from the weight of the plow. Even with it all the way winched out, the weight from the boom still...

Thanks a lot for the help, I appreciate it.

Looking to add a winch to my Argo Avenger. Question I have is, it already has the hoop hooked up from the inside to the frame as it has a brushguard. Just wondering how it will mount from the...

I was wondering how the junk in the tank was making it past the fuel filter as I have a paper element type filter (I did find some stuff in tank when I syphoned down to the bottom). Maybe this is my...