Search:

All the argos are very reliable,especially with the kohler efi motors,and super simple drive train, with easy access to same. Maintenance is simple and easy, greaseing the external bearings, chain...

weed guards are 1.5" PVC that is cut lengthways and glues back together around the exposed axles to prevent weeds from wrapping around them.

Also just finished my new demo, the 8x8 huntmaster,lots of cool stuff comes standard on this!!! Will post details and pics soon.:rock:

1535715356I just put together a new 6x6 including LED lights,hood fan, axle weed guards, 14.5" pro series tracks 3.3 tranny, this is a real sweet setup, the 23 hp kohler efi is awesome in this unit!...

I am a huge fan of the bedliners,and always have one in my HDI demo units as it keeps blood,dirt,debrie, etc. out of the bottom of the unit,keeping it much cleaner.
I have used the liner with the...

Tires are a lot closer to to same size from the factory now,but before they could vary in size by as much as 4- 6" in circumfrence.By measuring the tires,and putting the largest in the middle,for...

I agree also, you have this thing all apart,take your time,clean, check, and paint the frame,clean the tub real nice.Now is the time to replace any bad parts,ie your brake rotors,etc, while its all...

Hey Shayne,
Before you cut the axle, you might try and just cut off the old bearings and check to see how much damage there is to it,axles are pricey.Also upgrading to the HD bearings will be your...

LOL, I wish I had that kind of pull. It is nice, however,to get the inside scoop on some of the new changes,and relay them back to you guys on the forum,staying on the cutting edge of what is new at...

I did get some more info on the trannys, the high speed admiral, "HS" is geared higher all the way around, and is not recommended for commercial,heavy hauling,deep swamp, etc because of the higher...

SALE $26,995.00 -$1,250.00 REBATE = $25,745.00 PLUS 3 year warrantee. FYI 2017 HDI base model( avenger ST) is now $23,199.00.....

SALE PRICE 16,495.00 - 1,000.00 REBATE= 15,495.00 PLUS 3 year warrantee.

SALE price on this unit,plus 3 year warrantee 17,245.00

Congrats on your new ride!
Just tried to look up your unit with HT4718,nothing pops up,might not have been registered with ODG.

No, there is a bracket on the inside and outside supporting the rack,I don't see any problem putting weight on them,without being unreasonable.
ODG wants to sell their new wilderness series product...

Nothing, so I'm just going to call next week and see if I can get some info that way.

I requested the spec sheet and gearing info on the new LX tranny,been a couple days now, hope I can get some info.....

+2 on cutting them off,I use a cutting wheel,cut thru the first part of the bearing in two places 90 degress apart,and the outer bearing will fall off,this will expose the bearings and now start...

Congrats on your new unit!
The holes for the entry steps are predrilled into the side of the framerail,so no choice as to where they go,and garrantees the right placement as to not rub on the tires....

I agree 100% what Noel has to say here. The advantages far outweigh the disadvantages with a set of adairs,for example, you never would have had a hard time getting up on the sandbar in the...