Search:

Well, the conclusion to my troubles are that both the original charging and regulator and the add on alternator with built in regulator was active.
Why the voltage was unstable all of a sudden I...

I bought some on ebay search for Goodyear Runamuck Front/Rear 22-10-8 2* PSI ATV Tire - ARM3A8
Seemed ok, one of them had smaller circumferance than others so I put it in the middle.

PS: I had to...

Does anyone know the specs or dimensions of the alternator belt and the fant belt. The dealer in Norway do not have it since it such an old engine :-(

Thanks no I understand, that means i can removet then right?

Thanks for advice :-)

OK, I realize I need a new alternator. the argo one seem quite expensive compared to other aftermarket. Has anyone tryed any aftermarket alternators ?

Hi
My 1996 conquest with Kawasaki engine are suddenly showing high voltate at high RPM. And the voltage meter needle is peaking above 14 volts and vibrating, the water temperature needle is also...

Winter, Norway, Hordaland
Pictures from google photo doesnt seem to work

https://goo.gl/photos/1c3u5LpurNDo8gsf7

https://goo.gl/photos/1c3u5LpurNDo8gsf7

Thanks for god suggestions, the windshield sealand might be a god choice.
It is normally silicone based and man not fasten well to rubber, i phoned a supplier and they where scheptical.
Another...

So how did it go, any god advice

An idea, put on tubes and to avoid rims slippeing tyre to brake the tube have some oil between the tire and tube (oil or something else slippery.
Might be a bad idea as the tire will really be...

Hi

So with the old plastic tracks I need to have around 4-5 PSI in my old style (carlisle) tires. The rims are a bit rusty and I ahve tried to put in tubes, but find that the rim rotate without...

Hi
I have 1996 conquest MU gear box, and last year I got a rattling extra sound when motor was a bit than very low speed.
I found a very hardly noticeable slack in input shaft and drained the oil...

So how long will transmission, chains, and axles last ?

Hi Could you tell me where those cheap plastic tracks can be bought.
PS: I say some ebay or was it Aliexpress had rubber tracks for Argo, has anyone tried it.

Regards
Knut

Hi

Rebuilding my 1996 Argo Conquest made me think, all these manual every 10 or 50 hour lubrication points is not a good think. The work is a hassle but I was more thinking in terms of durability,...

Apparently the reverse idler gear is upgrade from oilite brass bushings to bearings and that cost 90 usd to change.

Any experience is IT really needed to change to the new 34-16a reverse idler...

Thanks, useful to know
I find 350 hours between transmission rebuild very low.

What about engine Kawasaki 20hp, any experience of how long it lasts?

Regards
Knut

Strange that Argo is not taking action on this.
Its completely inlogical that axles and bearings should be a problem on a light weight machine, with very soft tyres.

OK, so I finally got around to getting he transmission out and open it.
Seems like just bad bearings especially the one on the splined shaft, the bearing on the gearbox lid had was so word it wasnt...