Search:

Fuses are sized to protect the wiring insulation from melting.

Wiring is sized for allowable voltage drop which depends on point-point length.

Normally a 3% voltage drop is used for most...

Maybe, but check to make sure the solenoid is supplying 12 VDC to the post just to be sure.

If the voltage is not on the post, the solenoid is bad.

If the voltage is getting there, the wire...

I believe 2007 was the last year manufactured -> Argo UTV Response 8x8

The standard Argo transmission use an open differential technology when transferring power between sides, so your system is operating correctly.

If you have enough room to splice or crimp, you could always lengthen the wires.

Or if you can fine the same connector types, you could make a pigtail which is an extension wire placed between the...

Glad you found it and it was cheap/easy to fix - doesn't happen often...

:)

Tried to send the manual to you but it was too big, so I sent you a link to my OneDrive account - you can download it from there.

Let me know if you have any problems and good luck with your...

If you PM me your email address I can send you a copy of the service manual.

EDIT: It has a very good table to identify your charging system type, charging values, and how to troubleshoot.

A simple way to check the charging system is to measure the voltage at the battery when the engine is off and then measure the battery voltage while its running.

If the charging system is...

You're comments refer to cutting them out on a plasma table then.

I thought you were inferring that the 8" ring should be welded to the 12" ring...

Why? What would be the advantage, if any?

Keith, thanks for the diagram,

If you have an amp meter, connect the amp meter in series with one of the wires, connect directly to the battery, and measure the current flowing through it - about 1.2 to 1.4 amps.

If you don't...

So, its for an 8" rim.

My rims are 12" so I'm out.

Thanks for answering all of my questions.

What size rim(s) are you ordering for?

Do the kits come with the bolting hardware?

Is the inner ring smaller in diameter than the outer ring?

Does the inner ring install require the rim lip...

Thanks for the pictures!

When you get a price per wheel on a bulk order - I have a 6x6, let me know.

Any pictures of your wheels and I assume the work is done local to you?

Thanks,

Ken

You're welcome.

I used the site to download the service and parts manual for the Briggs in my MAX IV.

Take care and good luck with your new toy, I am still going through everything on mine...

You can get the manuals you need here -> Argo Adventure | Argo Atv | Argo Parts

Ouch...

:dontknow:

X2, plus its a nice little box for the $'s...