Search:

ya it got some pretty power!

now its all dismantled again for some fix that was needed long time ago. Chains, sprockets, all bearings (HDI) and rear extentions.

here is the tub! ready to...

slide hammer puller, with a wheel stud bolt welded on the tip of the tool has worked very well for me, in addition if you have some space, i use hydraulic bottle jack (little 2 tons) inside (between...

im upgrading my response to Hdi bearing, and i wanted to drill flanges and rims to get access to the grease fittings.... Since i use wheel spacers to be able to use tracks, i can't do that lol...

really nice project Mike! That will be a real beast!

hi Gkp, you can join two normal grease hose with a 1/8 npt female nipple and you're set !

thanks guys for reply!

ya many headaches hehe, nah not so bad but alot of patience! I have to think twice when i twist the throttle, i don't want to rip the transmission, but smoothly applied it...

hi everyone, its been a long time since i came here hehe, but theres some pics of winter 2014 doing some firewood with the machine, its been working pretty well !
...

hi Magnum, sorry for my english im not really good at it ! Nice project with your diesel engine swap!
I have done some mods also to my response 1997, using the famous suzuki g10 engine 1 liter. As...

some pictures

Radiator relocation

http://i1355.photobucket.com/albums/q712/prailleraide/projet%20argo/20130929_231306_zpsed42d54e.jpg
...

heres one little boring clip lol, more will come !

Argo no mud, - YouTube

hi everyone

i got some update informations for the clutch setup

this setup is pretty good, bunch of torque and the backshift is really fast when you need to turn on hard ground. Can go pretty...

seems funny but you got your wheel spacer on ? :P

I have tried many things to stop secondary turning when on Neutral, but i think its pretty normal the belt will keep the clutch turning since on neutral there is no resistance. So here is a new part...

HI RD thanks for the reply

Yeah at least i can let doors open and rear window also :P

For what i have ridden yet the radiator fan kicks in only sometime so i guess that is a good start.
...

Hey spookum.

Well thats some basic 1'' abs barb fitting, seems to hold the temp and pressure is not that big.

The best solution would be any brass or stainless 90 barb - barb 1'' fitting

thanks mike and spookum.

Nice to know, i had a thought about the crank, time will say the truth.

I run a snowmobile P85, 12'' center, 35mm offset, with a dayco HPX5013 (3211070). The radiator...

hi everybody, here is an update on my project

here is some pictures of the almost finished project

http://i1355.photobucket.com/albums/q712/prailleraide/IMG_0521_zps38e61464.jpg
...

Today, first ride outside with the new engine !

almost everything went fine! except the driven clutch...

need at least 5/8'' more clearance with the output shaft head bolt... it interfers while...

I use 35W hi/low and fog on my f150, main car, and been running 2 years since just a ballast broke, pretty good hid for the price.

No heating problem in f150 2010 headlight, they are big enough,...

Hi spookum

For now my digital camera need a new battery rofl i know i should get it...

I used 1/16 sheet metal and build a box around the existing hood hole. The original plastic hood will be...