Oh I forgot I spend a lot of time riding my Razor 1000 and quad and keeping them up also and have bought a tig welder and aluminum spool gun to help with this work.
Type: Posts; User: chris davison
Oh I forgot I spend a lot of time riding my Razor 1000 and quad and keeping them up also and have bought a tig welder and aluminum spool gun to help with this work.
I would post some pics of the engine in and the headers I hand fabricated but cant remember how to post them. The jeep rear end was a drum brake setup so i changed it to discs and fabricated a drum...
sand rail turning brakes that lock up one side while the other side turns twice as fast.
Nissan 300 zx motor is 165 hp 15" tracks x10' long is 3600 sq inches on the ground that's .66 lbs per sq inch at a 2400 lb vehicle should work pretty good.
I installed a 3 liter v6 with a 5 speed automatic and an old jeep rear-end slowly working towards completion. I am using pallet jack steering wheels their a 7" tall plastic wheel with bearings on a...
Well I have 50 feet of 15"snow mobile track and an engine and trans from a Nissan 300zx and have been removing parts from walley about650 lbs so far it will be nice to have a v6 and an automatic
I have been thinking about buying a doner car with a v6 automatic and changing to tracks with suspension as it it walley weighs 1865 lbs this might add 700 though and my buoyancy is 6000 lbs. I would...
I have a winch but haven't needed it yet it's a radio key fob control so I would just hook it up and stand to the side as it pulled wallet out
Yes utube videos try kabas511 Chris Davison and check the walk around at night with engine idling.
Thanks for the complements. I have been working at this new job now for 2 years and when they saw what I'm capable of they have been sending me all over the us to other sites to repair their machines...
Hi guys still haven't gotten to the machine shop yet and its 30 degrees in my shop when I have time to work on Walley so there is not much enthusiasm. I have made 2 of the 4 arms to pivot the prop...
Hey Rod are you going to rebuild whats there or change the mtr trans?
One thing I have found out about the deep cell recharagable batteries is that a reg auto battery can only be discharged to about 50% but deep cells can be discharged to only 25% left in it and still...
p.s. if you don't have an oil pressure gauge and your oil pressure goes in the toilet volts and amps don't mean a thing
I could not have said it better. charging a battery is like filling an air tank. one holds electrons under pressure 12vdc and the tank holds air say under 100psi. Electromotive force is volts it is...
A 40 amp alt should be more than enough for your needs that would run (2) 100 watt head lights at 16.6 amps (2) 10 watt rear lights at 1.7 watts and should keep your battery full.
What size alt. did you put on this machine? If you don't know the wattage or amp draw of a 12vdc bulb you can always measure the resistance. amps= volts divided by the resistance in ohms. once you...
also a grounding issue would probubly blow a fuse.
I've never known a voltage meter to show amps but it sounds like the power wire to the alt. is turned off when you turn on the head lamps. This would cause your alt. to rotate fine but with no output...
Hey guys I started a new job and am putting in 55 hrs+ sat. so no time to work on Walley now and no machine shop so I will have to pay for it all. Sucks when you have the skills but no machines to...