Search:

Well I have all 8 tires and a spare on. I just have this extra LARGE one laying around. I bought them quite some time ago, so return is not an option. Just looking into ideas to see what I can do...

So I outfitted my conqest with the 24" Frontier tires sometime ago and was wondering what I should do with the largest one that would not fit, being around 76" Circumference. Then I stumbled across ...

So how much do they cost? Does he take Visa? Does he ship to the States? Does he sell paddles to add to the belt for water propulsion? I'm hooked.

Buy your own High Capacity Capacitors and build your own.

Starting a car with ultracapacitors - YouTube

Were compression tests done with both plugs removed? If the adjecent cylinder had the spark plug in, it will throw off the readings. If you had both plugs removed while testing the cylinders and only...

Ultrasonic Cleaner - 2.5 Liter

If you got the dough, I would buy a new carb. You can always get a rebuild kit for your old one and keep it as a spare for when the new one clogs up. I'm tellin ya you gotta sonicly clean that thing...

What do they care what you're haulin on it?

Sounds exactly like the problems I had about a year or so ago. The throttle handle was gunked up and after cleaning it and graphite lubing it i figured that would fix the problem. When I disconnected...

And what Plot Hound does with his cat....is his business.......

What do you mean they can't be fixed? I have seen some pretty torn up tires repaired well enough to hold air and function well enough for slow speed off road use. Patches are HUGE!!!

Are you running old runamuks to drive the tracks? I bet the newer 22" Carlisles with the bigger lugs would give a better bite into the track and reduce the slipping. As for the walking out of the...

If any of the connecting rod bearings didn't get enough oil, you may have burned or spun a bearing. Prolly impossible to pull the oil pan without pulling the motor but if you pull the oil pan, if it...

Not too sure but in the last 4 seconds of your vid, Looks like your coil seems to be vibrating around synchronously with the sounds. Do you see it? Sounds like rod knock from lack of oil, perhaps a...

I would compression test at least and more specifically do a leakdown test on all cylinders. Wonder if you have a bad valve seat/valve?

Time to move out of Norway.....

Use a CHAIN LUBE on the chains like Tri-Flow or the like. Find some that advertises "sticks to chain" This will keep the lube from flying off the chainns onto the brake discs for the front set of...

Thats only 15 lbs heavier than a FD620? Looks like alot more metal there. You're going to have to fab up some type of engine cover for that beast!!!!!! Is that a Geo Metro engine?

Couldn't you apply a nonstick material inbetween the tube and the tire that would allow slippage....say maybe a lube or silicone? Then it wouldn't matter if the tire spun a little.

A Generac engine. Can get one for about 1800 bucks