Search:

I have a 2003 conquest with the super tracks that I use for hunting in the winter. We get a fair amount of snow and also wind that generally makes it drift pretty bad. The super tracks keep the...

What is the advantage to installing the new bearing kits? I have a 03 conquest with 120 hours on it that is getting water in the tub. The bearings seem tight I assume its the cork or the seals. Just...

It's a 2002 with 126 hours and no damage to the body. I haven't tried to tighten the flange bolts yet.

First time in the water with my conquest for about 30 minutes an I got about 2 inches of water in the tub. What's normal ?

http://i249.photobucket.com/albums/gg224/yoteblaster/Mobile%20Uploads/image_zpsxg7efaek.jpeg

Ok last post If you are thinking about buying an alternator its well worth the money. The battery stays charged, the machine starts better because the battery is at full charge, the heater doesn't...

I am going to recharge this thread. I removed the radiator an loosened the plastic intake for the radiator an the alternator went in with no issues. It did take some time mostly because I was trying...

No snow here yet in North Dakota but I would like to have it set up before it gets cold. I will check the thermostat. But I took the hose off of the lower side of the heater that goes into the T on...

I installed the heater in my conquest but I am getting no heat. The temp gauge doesn't even go up much over 100 degrees. The upper heater hose is warm but by no means hot. The lower heater hose is...

I started the heater install and figured out how to easily drain the radiator with out making a mess. I drilled a 1/8 hole where I was going to insert the T for the lower radiator hose, the hole...

I have the plastic intake.

I am going to install a heater in my Conquest but as I am sure you have heard the install documents are not the best. Does anyone have pictures of where the heater unit actually goes and anything...

I have a 2006 Conquest I am thinking about adding the heater, will I also have to have the alternator to make it work or will the standard system have enough to run the heater fan?

also how high are the ice cleats on the ARGO plastic tracks

Thanks, I should say first post in a long time. Anyone else have the height on other rubber tracks.

Hello, first post very long time reader. I am looking at different tracks for my Argo an they don't list the tread height on any of the tracks. I am interested in the rubber tracks made by Argo but I...

I got mine in SD at Liewer Enterprises, the guy is great to deal with. Their is a dealer in Grand forks as well Garden Hut

My buddy found an old Amphicat in a shed of his now past away uncle. The motor is loose and it isnt all rusted. It it worth fixing up and will they handle tracks. It appears to be in fair shape.

For the really cold starting I just put a primer with a hose that shoots raw gas into the carb. It starts everytime almost immediately.

In the extreme cold the tire pressure goes up and down alot causing the argo to drive crooked at times. I would like the tires to stay the same size regardless of teh temp outside. I wonder If I...