Originally Posted by
cdover73
Well, a couple things. First off, I am running the stock Argo tires/wheels. I don't know if they're the two piece you mentioned but probably so. Second, after I just insisted to y'all that the lug bolts were tight I went back just to make sure...and they weren't. They weren't hand threaded loose, but I got a full half turn on every one of them with a 4-way lug wrench. I snugged them comfortably tight since I didn't have the manual handy and didn't know off-hand what torque they are supposed to be tightened to. I will double check the torque and get it back to spec and also double check my air pressure. This may correct some of the problem. There may be two 'suspect' wheels that are warped/bent, but I ran it after I tightened them and watched over the side and they appeared to be better.
Thanks for the info though. If they are bent then it is what it is. I have a 3yr/2yr warranty so I'm all good!
Thanks,
cdover73