You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
Not sure where to post this one, but it's Argo related, so I'll try it here.
At room temp I have my brakes set up so I have a little slack before they engage. All good.
When I take it out, everything is fine untill the brake system heats up, then one brake tightens up untill there is no slack, and the brake is actually partially engaged. Then I have to stop and loosen that brake off.
Once I get home, and park the Argo, it cools off, and when I get in for the next ride, THAT brake is so slack that it it drops away from the dash 4-5 times as far as the other brake before it will engage.
So, is this a fluid problem, or an O-ring problem, or........?