My Starter motor keeps turning when I turn the ignition on

  1. Welcome to 6x6 World.

    You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
+ Reply to Thread
Page 2 of 2 FirstFirst 1 2
Results 11 to 12 of 12

Thread: My Starter motor keeps turning when I turn the ignition on

  1. #11
    Join Date
    Oct 2008
    Location
    Thornton, CO
    Posts
    646
    Quote Originally Posted by Rifpilchard View Post
    ... you also refer to the B terminal and the S Terminal...
    terminals of the switch. Check the link Joe sent to get an idea. Be aware that these show magneto switches and yours should be one of these. You'll have:
    [Came back and read this. I mean that yours should have the following terminals: (it is not a magneto switch)]

    B - battery (red)
    S - start (green)
    A - accessory (white)
    I - ignition (yellow)

    Here's the relavent chunk from the wiring diagram. (97 conquest)



    Does this look about right?

    Quote Originally Posted by Rifpilchard View Post
    ... when wire is re connected to the starter and the ignition is turned to run Starter turns but there is no spark if I then turn the ignition to starter on the spring load portion of the switch the starter continues to turn and I get a spark at the plugs.
    This is different than the first post. Now I think the starter and ignition are swapped.
    Last edited by JohnF; 09-26-2011 at 06:22 PM.

  2. #12
    Join Date
    Oct 2007
    Location
    statesville, north carolina
    Posts
    2,604
    Quote Originally Posted by Rifpilchard View Post
    Thanks for the help

    I'm not sure what you mean by DVOM, or NAPA, you also refer to the B terminal and the S Terminal could you clarify which these are as Electrics are not my strongest subject.

    Further to my recent question and some of everyones kind answers I have checked a few more things

    I have done a voltage check on the wire to the starter solenoid in the off position there is no power swiched to run there is a feed at 11.8 volts (Which I would assume is incorrect)

    when wire is re connected to the starter and the ignition is turned to run Starter turns but there is no spark if I then turn the ignition to starter on the spring load portion of the switch the starter continues to turn and I get a spark at the plugs.

    From this I assume that there is a short somewhere as I have checked the switch, I more confused than ever
    DVOM is Digital Volt/ Ohm Meter
    NAPA is an auto parts store (Never Any Parts Avaliable)
    B and S are terminal markings on the back of the switch. B for battery, and S for start. I have seen a few oddball switches where S is marked E for exciter (the name for the wire that goes from the switch to the small terminal on the starter solenoid to excite it, or turn it on.
    A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts