I am restoring my Conquest. Would like to remove the power pack. Could someone be kind enough to give me some pointers? Thanks.
I am restoring my Conquest. Would like to remove the power pack. Could someone be kind enough to give me some pointers? Thanks.
Remove the 3 bolts through powerpack frame, disc. battery cables, disc. exhaust, remove brake calipers and master cyl mount with sticks and cyl.s attached, disc. throttle and choke cable, unplug wire harness, remove dash support over trans, remove shifter handle, remove trans chains, disc. brake fan hose. Unless I'm forgetting something it should come out the hood opening as a unit.
My new beer holder spilled some on the trails - in it's hair and down it's throat.
Joe Camel never does that.
Advice is free, it's the application that costs.
Thanks, ArgoJim. I'm not in front of the machine now. Where are the 3 bolts on the power pack from located? I believe I've read that there are 2 in the rear near the transmission and one in the front.
Thanks
I just unbolted my tran. and pulled it out through the dash. just made it eazer to get at all the other odds and ends. Then the motor and mount came out through the top.