What size rim(s) are you ordering for?
Do the kits come with the bolting hardware?
Is the inner ring smaller in diameter than the outer ring?
Does the inner ring install require the rim lip to be modified or just prepped and welded to it?
Thanks,
Ken
Ken
For Sale 2000 Max IV
The rings are for the 21x11x8 rim.
These are only the rings, no hardware.
The rings are the same size.
All you do is just prep and weld.Originally Posted by ken white
"Racing is life. Anything that happens before or after is just waiting."
So, its for an 8" rim.
My rims are 12" so I'm out.
Thanks for answering all of my questions.
Ken
For Sale 2000 Max IV
Diagram for 12" wheel bead lock rings.
Again, the dimensions can be tweaked to fit the specific rim you are working with.
Helpful hint: You can nest an 8" bead lock ring inside the 12". That's how I do it.
Keith
ADAIR TRACKS, WITHOUT 'EM YOUR JUST SPINNING YOUR WHEELS
REMEMBER KIDS, THE FIRST "A" in AATV STANDS FOR AMPHIBIOUS
Helpful hint: You can nest an 8" bead lock ring inside the 12". That's how I do it.
Keith[/QUOTE]
I've had good luck with that...
Why? What would be the advantage, if any?
Keith, thanks for the diagram,
Ken
For Sale 2000 Max IV
By nesting the 8" rings inside a 12" ring the material for the 8" ring is free. Just a more efficient use of material. I always make both together even if I am only after one size ring.
Keith.
ADAIR TRACKS, WITHOUT 'EM YOUR JUST SPINNING YOUR WHEELS
REMEMBER KIDS, THE FIRST "A" in AATV STANDS FOR AMPHIBIOUS
You're comments refer to cutting them out on a plasma table then.
I thought you were inferring that the 8" ring should be welded to the 12" ring...
Ken
For Sale 2000 Max IV
Yes, just for cutting.
ADAIR TRACKS, WITHOUT 'EM YOUR JUST SPINNING YOUR WHEELS
REMEMBER KIDS, THE FIRST "A" in AATV STANDS FOR AMPHIBIOUS
So far I have orders for two sets. Is there anyone else before I place the order? I plan to do it this week. Thanks
"Racing is life. Anything that happens before or after is just waiting."
Posting Permissions
Reply With Quote
