You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
I just finished cleaning and repairing the tub. Soon I will be installing the new HD bearings and axles. I do have few questions please:
1) what are the torque specs for the bearing extensions and new HD flanges?
2) what is the proper orientation of the idler sprockets on the right and left sides? Do I need retaining rings or set screws? The manual is not clear on that.
3) Is it true that the chain sprockets on the front / rear axles are "floating" type (no set screws needed)?
4) Should I use lock tight on the bearings set screws as well as axles retaining screws?
5) Should I pre-grease the bearings before installation?
as always, YOUR INPUT WOULD BE GREATLY APPRECIATED!!!! thank you in advance.