first post, I've got a 6x6 bigfoot with 150hrs, that when you pull either brake lever it jumps back and forth. I pulled all of the covers off and noticed that the rotor is rusted up. going slow I can feel the rough spots on the rotor as they come in contact with the pads. I've thought of just using scotch bright pads to remove the rust? any thoughts?
Welcome to 6x6world. Yes,cleaning the discs may be all that's necessary to smooth things out a bit. Keep us posted.
Last edited by JoeMeg; 05-04-2015 at 12:18 PM.
Got home tonight and pulled the caliper off the right side and used a beartex pad to smooth it down. Put it back together and rode around a little. The brake is still kicking back and with it being dark I could see a few sparks coming out! When I had the caliper out looking down into it one side has a plate with a pad attached, the other is just a plate. Are both sides supposed to have the plate and pad?
Pads. I think your brake pads need replacing.
Stand for the Flag. Kneel for the Cross.
Brake pads are a basicly square metal plate with two holes at corners for cotter pins. The friction material attached is about 5/16" thick when new. Sounds like worn out pads and the rotor may be ruined also. Rotor should be very smooth on both sides.
[IMG][/IMG]
Here is a picture of what I am talking about. Am I missing the left brake pad?
Posting Permissions
Reply With Quote
