![]() |
|
|||||||
| Attex ATVs Forum for discussing Attex 6x6 ATVs. With names like Superchief, Crazy Colt, and Wild Wolf they have to be fun. |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|||
|
Hows it going everyone.
Figured I'd put up a post to say hi since I'm new to the board here and tell about our new project. My team and I decided that it was time to do up a 6x6. In the past we've put a 750 street bike engine in a 400ex atv chassis and turbo charged 3 cylinders in snowmobiles. A few days ago we purchased an Attex 6x6 from ebay. (actually going to pick it up on Sat the 5th) I don't even know the model. ![]() Maybe someone can identify it from the pic below. Anyway, this machine is in the works to be powered by a Polaris Liberty 600cc snowmobile engine rated at 125 - 130 hp before modification. Should be pretty interesting when done.. The 6x6 will get a complete overhaul, paint, powder coat, upgraded parts where needed for the additional hp. ![]() Were pretty excited about this build and anything that you guys know that will make it go smoother would be appreciated. |
|
|||
|
..
Mike, thanks for the welcome!
I'll definetly be updating with pics as I get em. As I said we'll be picking it up Sat morning so I'll have some more of it when we bring her home!! You'll be seeing that high speed run when its done for sure!!!![]() ![]() ![]() |
|
|||
|
Quote:
Heres a pic of the transmission... ![]() |
|
||||
|
Hi!
Welcome to the site! I have been actually looking at a future build not too far off from this (powerfull engine +Attex), even though I am not done with my first 6-wheeler (these aren't addictive, are they?), but I would recomend considering a springer kit from Whipper if funds/time would allow. 100+ HP makes for high speeds, and no suspension may lead to odd feelings in your lower back and legs, not to mention cracking the ABS and who knowes what else. If not, let me know, I know a very good chiropractor. ![]() ![]()
__________________
Where's the steering wheel?
|
|
|||
|
Welcome to the boards, and congratulations on picking up the Attex. I was watching that machine on ebay as well. I'm guessing it's a 297 model- looks like an ATV5000 transmission. You may find that you'll have to upgrade the transmission if you go to a hi-po engine; the 5000 has a 3/4"outer shaft and they tend to break under heavy stress. Have fun with the project!
![]()
__________________
(8) Attex, (2) Hustler, (1) RIM, (2) Terra Jet, (1) Max II, (1) Tricart ...so far |
|
||||
|
If you want to save some money, just post here in the wanted section. You might be surprised at the amount of parts that the members here have along with the advice that the Attex experts (one of which posted directly above me) on this board can give.
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|