Forum: Attex ATVs

This is what happens when the tow strap is connected to a down tree, then wrapped around axle, then hooked to hitch. :eek:This is why I should of...

the new baby is home sweetttttttt:6x6burnout:robbie

Does anybody have any info to share with me on how they mounted there gas tank my was rigged and was totally WRONG bounced around like crazy . pics...

the attex bodies are they poly or hdpe and does anyone have the inner and outer bearing part numbers thanks

Hello everyone! I'm fairly new to the site, been lurking a bit. I'm a pilot by trade and a mechanic in a former life. I've always wanted a...

I am working on an old Attex with a 6000 transmission 1 inch shaft. The driven clutch is a skinny belt type. I am trying to run with an engine that...

I bought the st300 for parts mainly for my 225/hustler. But the hubs and sprocket tubes are rusted solid. So I decide I would put a 8hp tecumseh in...

Hey Folks; I was wondering if someone could HELP me with placement of the holes in the axles? I made new axles but the old axles came out in pieces...

i spent today getting ready for the Busco ride next weekend, and while going over the machine, i noticed i have a headlight out. i was wondering if...

Hows everyone in 6x6 World ? I was just outside working on splitting the body of my Thunderchief not a good idea when its only 35 degrees out, as...

Hello everyone, my name is Brad. I am new to the forum here and love what many of you have done with your machines. I have just purchased an...

Just put a new belt on the Super Chief. I cleaned the clutches off to make sure there was not any grease or oil on them. The new belt squeals a...

I have a 6x6 attex superchief 500. I am in the process of trying to complete this project. I have a kawasaki 440 and t-20 transmission. I am looking...

Could anyone tell me if the gas tank that jp swift is selling would fit an old machine???? Thanks mike d

i have a 1970 attex st 400r with the baker hill 7000 trany with reverse,this thing sat a long time,and was hard to get in reverse,i got in...

I am pretty new to this 6 wheel stuff and have only one post earlier this month and the info is great. I took it apart and am replacing what seems to...

Has anyone used Whipper's 1 1/4" axels with the new argo flange on an attex. Would the side rail on the attex frame be wide (tall) enuf for the...

The SC i'm restoring didn't have the original ignition switch when I got it. My question is did the original have a kill in the off postion? The...

While looking at the parts to one of my superchiefs, I noticed something missing on the gas tank. On the top left side (port side) there is a hole...