Printable View
I dont know the size of the little round brake pucks that are missing from my 1970 attex. The ones that were in it were the original ones and they were not whole and crumbling so when I took them out they just fell apart. Those brakes are the whole reason my transmission has not been working properly. Also where can I find them or what can I make them out of etc. Thank you!
New pucks are 5/16" thick and just under 1 1/4" in diameter. I've made my own from various materials with varied success. The best ones I have found are from Richard's Relics. They're not cheap, but they last longer and grip better than any stock material I have found.
OK thank you. Can you throw at me some materials? I have a bunch of stuff in my garage. I think I'll mess around and experiment with a couple different materials before I buy some.
This is the stuff I liked the best as far as friction material. It still didn't seem to work as well as the stuff from RC.
McMaster-Carr
hi there honey im john a attex specialistover many years seems like you have a old version machine i had one of old st-300's that used the bunker hill trans yes the pucks i know well a real pain in the ass taking them out and putting in and adjust just right they were made of a special fiber composit not made anymore since the t-10 was desighned for attex richard marks at route 6x6 got hold of a bunch on buying out the factory of attexshut down a good friend of mine altho i enjoyed all the echanical work un doing the borg warner you have to be careful not to chip them on inserted the disks they are very brittle dont try any other stuff they wont work feel free to call me at 619-370-4503 i can give ya alotof [ppointers i also specialize in restorstions of super chiefs''' they are the best machine ever and the fastest i got great shots of the best one ever redesighned by nme in the nation heres my private email they way your a real cutie-pie a mechnic type girl...thats fasinating...jketch@optimum.net