-
I read thru the pages of your build. VERY NICE! And, money wise, that's one helluva machine for $2.5k. Of course, that doesn't include your 1.5 million man-hours. :D
As for some women, that's about right. Their interest in a man's garage/workshop and the projects within is about what ours is for a sewing room... next to nada.
I like your air duct ideas. I was considering 8" round stovepipe, but I like the flat duct better. I still need to make a duct setup for my Max II. There's a 20 HP Vanguard shoehorned in there by the previous owner. I've taken it out playing a couple times, but in the mid to high 40's for temp. It ain't gonna' make it come late spring or summer though, so I need to make a duct soon.
-
-
Adondo,thanks for the compliments,you got it with 1.5 million man hrs:coffee: Do you self (and your engine) a huge favor and give it a fresh air intake duct asap. Don't worry so much about the hot air,it will find it's own way out. Shoehorning a big v-twin into a confined engine bay is a recipe for disaster,how do I know? Paragraph 1 of post 1 of this thread:confused: I am convinced that lack of this duct had a big part in the demise of my 23hp Kohler (suspect other issues too but overheating did not do any good). This was in the green one in my signature photo. Here is the duct I made for the 20hp replacement http://www.6x6world.com/gallery/data...s/100_3457.JPG
Bridget,thank you for the compliment. Yes,to do a through job one must completely disassemble the machine. It's so much easier to access everything and get into the corners of the lower tub that seem to take a beating over the years. The empty tub is so light weight and easy to move around,flip over,etc. Turning it over to wire it was one of the bigger favors I did myself recently. I later had to redo the GPS power supply tucked up under the dash due to a pulled off connection from an overzelous tape job. It was while lying on my back reaching up that I realised just how nice it was to wire upside down:) I'm so pleased with the outcome of this build that old Gizmo is going to receive the same tlc. I didn't strip it down completely during the first build and have been getting nickel and dimed with minor issues since. So,a complete tear down is coming for her. I'll start a thread on it,stay tuned.
Joe.
-
It's about time for an update here. I'm bad with taking and posting photos but I promise I will get some current ones up soon. Made and installed a bench type seat and back. Used 2" wide adhesive backed velco strips further enhanced with a dash of Gorilla glue as a means of fastening. First time I ever "monkeyed around" with it. Pretty amazing stuff. Also,got my winch installed. Just want to add an eyebolt as an extra attachment point. IDK,maybe it's just me but,when I get an old machine there is usually at least one thing that say's "re-use me,re-use me". On my "PA" colt,one of those things was the rear rack that seemed to be OEM or otherwise just a real nice unit.
http://www.6x6world.com/gallery/data...s/100_4191.JPG
It was pitted and caked with rust so I just knocked of the loose stuff with some 100 grit cloth and am prepping it with Kleen-Strip Rust Converter (Duro "Extend"). Once finished prepping,I will paint it black with something.
-
Thanks for by he update Joe! Look forward to the pictures.
-
Bench seat and back. Had 3/4 plywood at home. Foam was "samples" for being good customer (I buy from them for work). Marine grade vinyl was leftover from project years ago (re-covered my quads seat with it as well). My Brother gave me the velcro. So,the cost was minimal to say the least.
http://www.6x6world.com/gallery/data...s/100_1749.JPG,http://www.6x6world.com/gallery/data...s/100_1750.JPG
Did the electrical installation during the build,needed only to fab and install a mount for the winch. There is an equally sized plate inside the nose.
http://www.6x6world.com/gallery/data.../100_17511.JPG
-
-
Looks Good! That is a neat rack.
-
Thanks Larry. It would be interesting to learn some history on it. Factory,aftermarket,made by owner,etc.
-
Tow vehicle has not been roadworthy thus far in 2014. Rear brake lines rotted during the winter layover at my camp in Andover,OH. If anyone is wondering why they charge so much for this type of repair,please see me,I can explain it very accurately,lol. So,this is all the further Gadget has made it from the build shop since completion.
http://www.6x6world.com/gallery/data...s/100_1762.JPG,http://www.6x6world.com/gallery/data...s/100_1763.JPG,http://www.6x6world.com/gallery/data...s/100_1764.JPG