Search:

I actually went down to West Salem and looked at this wreck a few weeks back. Believe me, it's a "20 footer," in that it looks great from about 20 feet away... then you get close & see what it's all...

Thanks.

Considering making new axles for my ST/295. Have searched site and have seen recommendations for both 4130 Chromoly and 4140 stock. Which is the best to use for overall durability and longevity -- or...

Well, we ended up having to cut four of them out - that was about a month ago - and have the frame, engine and tranny out of it & it's back home at my house. Have been working on the hull doing...

Ended up having to cut the one front axle out. Tried everything you guys said - and the air hammer/chisel did work well for moving the outer bearing retainer and outer bearing further out near the...

Thanks to all who have responded. Thanks for the offer of sprockets, Toys. We're hoping to save all of these, but time will tell. My best friend, who helps me and is into these things too, has a full...

Thanks. Will try the impact chisel, but have been using PB Blaster, have let parts soak for weeks, slide hammer, heated w/ oxyacetylene until cherry red -- but are really concerned about...

Hi guys. I am dismantling my ST/295 so that I can repair the hull. Have two axles out, but the others - especially both fronts - refuse to break loose, even with heating them with oxyacetylene. We...

Here it is... Attex 500 Super Chief, 6 wheeler | eBay

It's been so long since I had my Scrambler, I can't remember if I had to loosen the jackshaft or not to put the new belt on - but I want to say that I did.

The grease gun must be modified by removing the spring loaded follower assembly and then welding the elongated hole in the cap closed. If you try to use an unmodified gun, you will have ATF...

disregard.

Thanks you guys. Yeah, we're both pretty stoked about getting this vehicle rebuilt and refurbished. On top of the fact that it'll be cool to have it up and running, it's kinda like "nyah-nyah,...

Just wanted to add that even though the finish is pretty smooth, the plan always was to paint this vehicle OD green again, so he's far from perfect. I completely understand why now why you guys are...

As you can see in the photos, someone (not either one of us) at some point in the vehicle's life had tried to repair it with fiberglass & resin. it was still wet underneath most of this stuff and...

The two photos above show Froggy the day that we picked him up back in November of 2014. Chuck's obviously thrilled to death with the re-acquisition. The vehicle had been sitting outside for God...

Back in the '80s, my friend Chuck owned an old Attex that he affectionately named "Froggy." He was beat up, had bent axles, roached bearings, no seals to speak of, but he ran and the plan was to...

Thanks you guys. Happy to report that the machine, as of two weeks ago, has been moved to my friend's garage down in Southern Ohio and that's where it's going to stay for the time being. Total...

Is there a way to determine the year of manufacture from the serial number?

The worst of the damage to the lower hull. This is the left rear corner. I'm confident that what I've learned from you guys that this can be...