Search:

Thanks for checking. I did not think about the hole being drilled to deep. I'm glad the caseing did't bust out. Thanks again John

Here's my problem. I had lost right brake and right reverse way back in the woods. Limped it home making only left turns. I thought some band adjustment was needed but noticed the right upper plunger...

No more bolts. Seems to be stuck to the inner fram bearing, it has a hole in the bearing sleeve but no set screw.

The sprocket tube is loose of the shaft. Could the inner frame bearing have one of those funky twist locking collars?

It has the 2nd earily outer housing, big 3 bolt pattern. I have all the bolts and pins out and it will not budge.

I'll have to dig in the my other garage, I think i have some long bike cables from when I built my limo bike. Thanks

I have a 208tt with a baker 7000 tranny. I'm looking at lifan motors 13hp or 15hp? I have a salsbury clutch from a scrambler and my stock clutch from the JLO. What clutch should i run with the lifan...

Where do i find that pic? I'm making progress, he had some snap ring on and others not on. I now have it centered but now it is hard to shift. Going to move it back a little and see if that helps. I...

Thanks, both outer groves are there. It all seems like there is a 1/4" shim inside the box that is on the wrong side moving both shafts to the right. The calipers are off a 1/4" inch also. I'm going...

I bought a used rebuilt 7000 tranny for my 208. The guy i bought it from said he rebuilt it, I'm not sure if he knew what he was doing. The problem is that both outer bearings are a quarter inch out...