hey get a honda pilot or an fl350 throttle cable they work great for 10 bucks new on ebay
Type: Posts; User: scramblerjohn
hey get a honda pilot or an fl350 throttle cable they work great for 10 bucks new on ebay
great it did mine along the seat.your idea may block air flow for the fan too cool the motor,just an idea
well the old pump was a faucet fuel pump,there is no return or over flow,the old motor was a 20hp kohler,ran fine but,did find out the pump was bad,thanks
i changed the oil,and disconected the fuel pump runs good,the pump is 3-5 psi can i run this pump,mu old pump was 4-7 psi
runs great,i just replaced the old electric one with a new one,it has the stock pump,but it would not pump gas to the motor,the oil doesnt smell like gas....:hmmmm2:
the motor has less than 20 hours on it.it comes through the vent in the case,the oil level was fine just on the full line,i cleaned the plugs and cleaned all the oil up,started it and it did it...
heys guys i have a max4.i just put a next to new honda 24hp gx670 in it,i just put a new low psi fuel pump in it,the problem is when it is running about 2 min,it starts dumping oil in the carb...
hey guts how long is the standerd max 4 throttle cable?
what do you guys think of this trailer,,,Amphibious Vehicles - Amphibious ARGO ATV, ARGO AATV, ARGO All Terrain Vehicle
any updates,where do you get the argo guides?
its on the tankside,i didnt know if it was a filter or a regulator,if it was a regulator it was on the wrong side,can i run a stock pump on a 24hp honda,with the electric pump or not
hey guys just wonted to know if you would take a look at the picture.is the thing in front of the pump going the rightway.is this a regulator to slow the psi...
hey guys i found a good site for cheeeeeeeepppppp clutches,,,,http://www.apskarting.com/pdfs/190-202.pdf
found out that the honda pilot and the odessey have the same belt as the max4,44 1/2 by 1 3/16 inch belt,20 dollars on ebay
yep i have a clutch from a diesel polaris sportsman,very low rpm clutch,i also have a few springs,this will be way better and alot cheeper
ok got to looking,the 10:1 tapered shaft is 30mm,most of all snowmobile clutches are 30mm,so i have the same clutch,this would be way better than the standered 6x6 clutches,i do know polaris,there...
ok i have a diesel clutch from a polaris sportsman,it would work great i think,would the taper be the same
hey guys,i have a chance to get a honda 24 tappered shaft 10:1,what clutches fit the 10:1 shaft
looks like the one with the eyeloop is a ground,the one that is flat goes to the black plug
i went and looked found nothing,if you could find it,it would be great,im looking into this,the vanguards are so much,i can get a next to new geo motor for 500,could use all the help thanks