Search:

Any suggestions on what muffler to use? Looking on line I’m
seeing what looks similar to the style that we replaced, a muffler that basically mounts between the two cylinders. I’d like to keep the...

I thought it was a loose chain at first. I've tightened it up a bit but haven't had the machine out yet to see if that eliminated the noise, or some of it.

I've got a 400 Chief with the big brake discs that are mounted on each side of the T20 and are loose on the shaft. They don't spin at all but you can shake them from side to side and they kind of act...

Here are some photos of the Vanguard 18 installed in my 400 Chief. This is a 4 change machine. The Vanguard was installed to fit under the unmodified Attex engine cover. To accomplish this the stock...

MFG Supply ships fast!

http://i.imgur.com/JLGvVlw.jpg

Thanks for the recommendation. I'll order one up. I won't be hauling any heavy loads, but there could be some hills in its future. I'll tackle that later if it becomes an issue.

I've got a used Vanguard 18 that I'd like to put into my Attex Chief 400, but it needs a clutch. Can anyone recommend what clutch I should look for? I will be using this for trail riding. I've been...

No, I didn't catch an episode number if there is one. I wasn't on the TV with the for so I wasn't able to record it either. I'll look tonight to see if they have anything about episodes. It was on...

I was channel surfing late last night and ran across an old episode of the game show "Let's Make A Deal" with Monty Hall. I hadn't seen this show in decades so I decided to watch for a while. It was...

I put exhaust wrap on the exhaust last night and took it out for a drive. I drove for about 20 minutes so the engine would get nice and hot. It ran great for this period, and idles nicely....

Could this be a case of vapor lock? Once the hot motor is shut off, the fuel that is sitting in the carb heats up and when we try and restart it will not feed fuel until everything cools down again?

The fuel pump has a new diaphragm in it.

My Attex Chief with the JLO 400 engine starts when cold and runs strong, but if it is shut off when hot it will not restart again until it cools down. While still hot we have tested spark (good),...

I have a Great Pyrenees/Landseer Newfoundland mix puppy. He seems to be the runt of the litter, he is 5 months old now and only 63 lbs.

I finally repaired my damaged front corner. The goo and fiberglass seems to be pretty sturdy, but I still want to put a metal body band on.
Here is the repaired flange:...

I just hope the T20 lives on after this acquisition settles in. I'm never going to buy a brand new Argo, Max or Mudd Ox. and the main reason I was comfortable buying and restoring a very rough Attex...

I have not had a chance to drive it (been out if town), but my brother has. He said the motor does bog down when trying to go up a steep incline. It's like the clutch system is in high gear. Does...

Sticks were forward and I don't think it was bogging down but in the heat if the moment I may have missed that. Next time we run it we will try and observe in more detail what is going on when this...

Post a picture or it didn't happen!

Could T20 bands out of adjustment also result in difficulty going up a steep slope from a stop or slow entry speed? I recently had the T20 apart and the bands/drums looked good, but not sure if it is...