New to the 6x6 world need help figuring out how to remove bottom seat cushion and floor board assembly.
New to the 6x6 world need help figuring out how to remove bottom seat cushion and floor board assembly.
It's a lovely chore involving pulling up on the seat and also pulling the sticks back as you clear the parking brake. Some profanity required the first time or two...
Milkman thx for advise it seems like its attached in the center rt in front of the sticks wondering if its wedged under some sort of mount.
shouldn't be. there is a pin just back and left of the sticks that may have a clip in it. Once you get it out, most people cut the seat portion separate from the rest just above the shifter slot. that makes life a lot eeasierOriginally Posted by Hawkeye
A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed.
after years of hassling getting my max 2 floorboard out up over the sticks , i cut mine in half crossways.. right thru the middle of the stick holes . now it's a piece of cake to get the seat part out , then the front part out . they are still just as sturdy as one piece . hope this helps . johnboy va.
Posting Permissions
Reply With Quote
