Originally Posted by
msafi65
I know we have discussed this before. Are you still using the original braided ground strap? I?ve had several fail in the crimped ends. Have you used a jumper battery when it acts up? The added amperage usually helps some. I would like to figure out if the drive is engaging the flywheel on a click - non crank. Have someone turn the key to get the click and carefully move the driven clutch to see if drive is engaged. If the drive is engaged, jump B+ to the input terminal of the starter motor. With key engaged and jumping across solonid. If it cranks the problem is likely the solonid not closing the contacts properly. These cold problems are usually slow engagement caused by heavy grease on drive or solonid plunger. Have to wait for cold weather to test now! Good luck. The