Search:

I have the low geared Trans in my machines, so rarely use low gear.
I would suggest running in High until you cant, then shift it down when needed.

RD

I’ve had more experience with the 24”, but if they are any indication, then the 25’s are probably all over the map in regards to size.

RD

I’ve heard the same....

RD

Ok, it just sounded like maybe an intake valve pushrod might be bent, or skipped out from under a rocker arm. Common problem with the 20hp Kawi.
They actually idle fine like that, but have no power...

Is this a 20hp Kawi engine by any chance?

The Argo ROPS is a bit heavy at almost 250lbs. It’s noticeable when swimming, but not terrible. If one were to start adding weight by closing in the ROPS, or by hauling stuff on the roof ( boat...

Thanks olargo, I’m right proud of them. :)
There will be more videos, summer is coming




Hi John, they are really saving my back, lol. Getting at those front axles is the worst:)
I do...

My daughters could not get the front left axle out of one of our Conquests. The inner bearing simply would not let the axle go. They built an axle removal tool, test fit it on the rear axles, then...

Your Brackets look good, and probably work great.
I've thought about making a set as well, but always seem to just go back to tying down from the Hitch Reciever at the back and the winch mounting...

Yes you can, but its a tight fit, especially the front 2 on each side.
I have a set of Frontiers that I sometimes run on my Conquests, I have to put the 4 "smallest" ones on the front of the machine...

I have a couple 8x8 Conquests, one is low geared and makes a lot more noise than the other. I hunt with both and have not noticed any difference in the amount of game I see with either unit. Moose OR...

No Press required, just a simple seal driver is all you need
...

GL-5 is EP Gear Oil

Hypoy-C is Castrols product name for Non-Synthetic EP Gear Oil.
Syntrax is Castrols product name for Synthetic EP Gear Oil

I think:dontknow:

RD

Cool build, I love it.

RD

They look like "Sleeve Anchors", possibly had Eye Bolts threaded into them, and used as Tie Down Points for straps or bungie cords???

RD

This old Thread has some good pics of the front/rear of my machine. It's pretty tough.

http://www.6x6world.com/forums/argo-atvs/36563-tie-downs.html

RD

I have no problem with it.:)

RD

2004 Ford F-350 CC LB 6L-Diesel 4x4.
Air/Cruise/Tilt, Automagic Trans.
Base model- AM/FM Radio, Manual Hubs
:)
I've deleted the EGR Valve and opened the exhaust a bit.
Its been good to me,...

My Conquests would probably boil the fuel in the filter if it was under the hood. They do get hot under there.

RD

Good ideas Jim. The Raidtrak looks the most complete, and it also looks very heavy. Would be the biggest challenge, by far.
The Tera looks cool, and I think you're right about the girls liking it....