You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
have a 1980 max 11 pulled the tire off then losen the ring by the axcel took the bolt out on the drum took the 3 bolts out holding the ring on the outer tubside pulled the axcel out replaced the drum put it all together and realised that there was nothing holding the axcel in place looed at the other side and its the same way only a setscrew ring on the outside holding it in place nothing on the inside on the axcel can not beleive we have been running it this way for years or am I missing something looking through the how to section it shows one on the inside not makeing sence to me
watched the vidio again and relised the whole thing is put together wrong the inter flange was inside the tub there was a gasket between the outer ring and the tub but still nothing on the inside to keep it in place its a hollow axcel rideing on a brass bushing but worked for years that way will clean it and put the rings per the vidio and see what happens
Reply With Quote