1) break off old stem.(thats the easy part..)
2) get a package of the smaller valve stems(any auto parts store carries them ,usually.. # 413 's?)
3) this may take practice.. you need a used pair of pliars, a dull screw driver, and some quality dish soap..(full strength..)
4) slowly ..attempt to put the bottom end into the tiny hole of the wheel,after sand paper cleaning around the hole and wiping it off..
5) a tiny bit at a time..making sure the stem is well lubricated with the dish soap.. Also holding the valve stem in the 5 o'clock position.(facing down,,)
6) as you almost have it in all the way, turn the stem to the 6 o'clock position ,finish pressing it in..
7) guess what? it is repaired..
![Smile](http://www.6x6world.com/forums/images/smilies/smile.gif)
Happy AATVing!!
![Big Grin](http://www.6x6world.com/forums/images/smilies/biggrin.gif)
any questions? feel free to ask..pictures forth coming..
Parting out 2012 Argo HDI
I am parting out a 2012 Argo 8X8 HDI.
arielsq 06-15-2024, 12:20 PMContact me with what you need.